It is never pleasant to discover a sound on your car that you don’t know where it comes from. You may be thinking about what to do when you find a reversing gear noise that lasts on your Volkswagen Fox? Any gearbox issue can be important, but before making sure, it is better to do a few checks. Our team has made this content page to help you eliminate it. First, we will see what the sources and the different gearbox noises can be on Volkswagen Fox, and second, what are the solutions available to you.
Classical reverse Volkswagen Fox noises and some tips to look after your gearbox
Why does the reversing of my Volkswagen Fox make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult exercise. The noise made by the reversing of your Volkswagen Fox is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears implemented for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the car in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the car is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. In fact, the pressure you will exert on the gears will be significant and you will create a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely usual if you find out a reverse noise on your Volkswagen Fox if you shift gear under these conditions.
Different Volkswagen Fox reversing noises and their causes
Finally in this section, we will move on to what you are probably most enthusiastic about in this article, to find out about the origin of reversing noise on Volkswagen Fox. Here are the 3 typical sounds you may be victim of.
I notice a grinding noise when starting in reverse gear
If you discover a grinding noise when you start in reverse with your Volkswagen Fox, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to read this article for more info about strut mount noises on Volkswagen Fox.
An increased reverse knocking noise on Volkswagen FoxX
If you are subject to a knocking noise when you are in reverse with your Volkswagen Fox and this noise tends to amplify as you gain speed. It is plausible that you are confronting a serious issue that needs to be solved very fast before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears very fast. Take your car to your repair shop quickly or check out this content page about gearbox noise on Volkswagen Fox for more details.
I find out a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Volkswagen Fox reverse gear makes more noise than before, it is plausible that filings have been made and are moving around in it. It is therefore time to empty the box.
