It is never enjoyable to discover a sound on your car that you don’t know where it comes from. You may be questioning what to do when you notice a reversing gear noise that remains on your Volkswagen Caddy 3? Any gearbox problem can be serious, but before making sure, it is better to do a few checks. Our team has written this content page to help you solve it. First, we will see what the sources and the different gearbox noises can be on Volkswagen Caddy 3, and second, what are the solutions available to you.
Classical reverse Volkswagen Caddy 3 noises and some tips to look after your gearbox
Why does the reversing of my Volkswagen Caddy 3 make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult action. The sound created by the reversing of your Volkswagen Caddy 3 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears chosen for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the car in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the car is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. In fact, the pressure you will exert on the gears will be significant and you will develop a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely common if you listen to a reverse noise on your Volkswagen Caddy 3 if you shift gear under these conditions.
Several Volkswagen Caddy 3 reversing noises and their causes
Finally in this section, we will move on to what you are probably most curious about in this article, to find out about the source of reversing noise on Volkswagen Caddy 3. Here are the 3 typical sounds you may be victim of.
I notice a grinding noise when starting in reverse gear
If you discover a grinding noise when you start in reverse with your Volkswagen Caddy 3, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to consult this article for more info about strut mount noises on Volkswagen Caddy 3.
An increased reverse knocking noise on Volkswagen Caddy 3X
If you are subject to a knocking noise when you are in reverse with your Volkswagen Caddy 3 and this noise tends to build up as you gain speed. It is plausible that you are dealing with a serious problem that needs to be resolved quickly before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears quickly. Take your car to your auto technician quickly or browse this document about gearbox noise on Volkswagen Caddy 3 for more details.
I find out a noise when I go in reverse
Finding out a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Volkswagen Caddy 3 reverse gear makes more noise than before, it is plausible that filings have been made and are moving around in it. It is therefore time to empty the box.
