It is never pleasurable to perceive a sound on your car that you don’t know where it comes from. You may be wondering what to do when you notice a reversing gear noise that continues on your Renault Master? Any gearbox issue can be important, but before making sure, it is better to do a few checks. Our team has written this document to support you deal with it. First, we will see what the origins and the different gearbox noises can be on Renault Master, and second, what are the solutions available to you.reverse-gear-noise-renault-master

Classical reverse Renault Master noises and some tips to look after your gearbox

Why does the reversing of my Renault Master make a different noise from my other speeds?

De facto, integrating all gears, bearings and pinions into a gearbox is a difficult task. The sound induced by the reversing of your Renault Master is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears chosen for the reverse gear.

Tips to reduce wear on your clutch and gearbox

  • Don’t give a big boost:
    Certainly, if you kick the throttle hard when you are in reverse or when you put the car in the revs, you risk to burn your clutch or gnawing at the gearbox pinions.

  • Never reverse while the car is in motion or vice versa:
    Reversing the direction of operation of the gearbox during operation is a very bad practice. In fact, the pressure you will put in on the gears will be significant and you will create a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely usual if you hear a reverse noise on your Renault Master if you shift gear under these conditions.

Several Renault Master reversing noises and their triggers

Finally in this section, we will move on to what you are probably most curious about in this article, to learn about the cause of reversing noise on Renault Master. Here are the 3 typical noises you may be victim of.

I perceive a grinding noise when starting in reverse gear

If you perceive a grinding noise when you start in reverse with your Renault Master, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to read this paper for more info about strut mount noises on Renault Master.

An increased reverse knocking noise on Renault MasterX

If you are subject to a knocking noise when you are in reverse with your Renault Master and this noise tends to increase as you gain speed. It is plausible that you are dealing with a serious issue that needs to be fixed as soon as possible before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears in short order. Take your car to your mechanic quickly or read this article about gearbox noise on Renault Master for more details.

I acknowledge a noise when I go in reverse

Experiencing a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Renault Master reverse gear makes more noise than before, it is plausible that filings have been produced and are moving around in it. It is therefore time to empty the box.