It is never pleasing to hear a sound on your car that you don’t know where it comes from. You may be thinking about what to do when you identify a reversing gear noise that lasts on your Hyundai Ix20? Any gearbox problem can be severe, but before making sure, it is better to do a few investigations. Our team has made this document to support you resolve it. First, we will see what the sources and the different gearbox noises can be on Hyundai Ix20, and second, what are the solutions available to you.
Classical reverse Hyundai Ix20 noises and some tips to look after your gearbox
Why does the reversing of my Hyundai Ix20 make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult process. The sound induced by the reversing of your Hyundai Ix20 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears more quiet than with spur gears implemented for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the car in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the car is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad idea. In fact, the pressure you will put in on the gears will be significant and you will generate a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely normal if you experience a reverse noise on your Hyundai Ix20 if you shift gear under these conditions.
Several Hyundai Ix20 reversing noises and their causes
Finally in this section, we will move on to what you are probably most interested in this article, to find out about the cause of reversing noise on Hyundai Ix20. Here are the 3 typical noises you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you hear a grinding noise when you start in reverse with your Hyundai Ix20, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to check out this content for more details about strut mount noises on Hyundai Ix20.
An increased reverse knocking noise on Hyundai Ix20X
If you are subject to a knocking noise when you are in reverse with your Hyundai Ix20 and this noise tends to amplify as you gain speed. It is plausible that you are experiencing a serious problem that needs to be solved rather quickly before destroying your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears very fast. Take your car to your mechanic quickly or browse this document about gearbox noise on Hyundai Ix20 for more information.
I listen to a noise when I go in reverse
Listening a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Hyundai Ix20 reverse gear makes more noise than before, it is plausible that filings have been produced and are moving around in it. It is therefore time to empty the box.
