It is never enjoyable to perceive a sound on your vehicle that you don’t know where it comes from. You may be thinking what to do when you identify a reversing gear noise that continues on your Fiat Punto Evo? Any gearbox trouble can be important, but before making sure, it is better to do a few inspections. Our team has written this paper to help you solve it. First, we will see what the sources and the different gearbox noises can be on Fiat Punto Evo, and second, what are the solutions available to you.
Classical reverse Fiat Punto Evo noises and some tips to protect your gearbox
Why does the reversing of my Fiat Punto Evo make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult task. The noise generated by the reversing of your Fiat Punto Evo is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less strong than with spur gears chosen for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. In fact, the pressure you will put in on the gears will be enormous and you will create a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely typical if you perceive a reverse noise on your Fiat Punto Evo if you shift gear under these conditions.
Diverse Fiat Punto Evo reversing noises and their triggers
Finally in this section, we will move on to what you are probably most enthusiastic about in this article, to learn about the cause of reversing noise on Fiat Punto Evo. Here are the 3 typical sounds you may be victim of.
I hear a grinding noise when starting in reverse gear
If you perceive a grinding noise when you start in reverse with your Fiat Punto Evo, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to consult this document for more details about strut mount noises on Fiat Punto Evo.
An increased reverse knocking noise on Fiat Punto EvoX
If you are subject to a knocking noise when you are in reverse with your Fiat Punto Evo and this noise tends to increase as you gain speed. It is plausible that you are going through a serious trouble that needs to be solved quickly before wrecking your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears quickly. Take your vehicle to your technician quickly or browse this article about gearbox noise on Fiat Punto Evo for more details.
I acknowledge a noise when I go in reverse
Finding out a noise when you shift into reverse is normal and related to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Fiat Punto Evo reverse gear makes more noise than before, it is plausible that filings have been created and are moving around in it. It is therefore time to empty the box.
