It is never pleasant to experience a sound on your vehicle that you don’t know where it comes from. You may be wondering what to do when you find a reversing gear noise that persists on your Dacia Logan? Any gearbox problem can be important, but before making sure, it is better to do a few inspections. Our team has created this content page to support you fix it. First, we will see what the sources and the different gearbox noises can be on Dacia Logan, and second, what are the solutions available to you.
Classical reverse Dacia Logan noises and some tips to look after your gearbox
Why does the reversing of my Dacia Logan make a different noise from my other speeds?
De facto, adding all gears, bearings and pinions into a gearbox is a difficult process. The sound made by the reversing of your Dacia Logan is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears employed for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad plan. Indeed, the pressure you will apply on the gears will be monumental and you will produce a premature wear and tear of the gears. You can even destroy the gears of your gearbox at speed by doing so. It will therefore be completely typical if you hear a reverse noise on your Dacia Logan if you shift gear under these conditions.
Several Dacia Logan reversing noises and their triggers
Finally in this section, we will move on to what you are probably most enthusiastic about in this article, to learn about the cause of reversing noise on Dacia Logan. Here are the 3 typical sounds you may be victim of.
I acknowledge a grinding noise when starting in reverse gear
If you experience a grinding noise when you start in reverse with your Dacia Logan, it may be the engine mounts that are tired. In fact, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to check this document for more info about strut mount noises on Dacia Logan.
An increased reverse knocking noise on Dacia LoganX
If you are subject to a knocking noise when you are in reverse with your Dacia Logan and this noise tends to amplify as you gain speed. It is plausible that you are dealing with a serious problem that needs to be solved rather quickly before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will disperse to the rest of the box and damage other gears in short order. Take your vehicle to your repair shop quickly or browse this content page about gearbox noise on Dacia Logan for more information.
I perceive a noise when I go in reverse
Hearing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Dacia Logan reverse gear makes more noise than before, it is plausible that filings have been created and are moving around in it. It is therefore time to empty the box.
