It is never enjoyable to experience a sound on your automobile that you don’t know where it comes from. You may be thinking what to do when you notice a reversing gear noise that continues on your Skoda Kamiq? Any gearbox trouble can be severe, but before making sure, it is better to do a few investigations. Our team has created this paper to support you solve it. First, we will see what the origins and the different gearbox noises can be on Skoda Kamiq, and second, what are the solutions available to you.
Classical reverse Skoda Kamiq noises and some tips to maintain your gearbox
Why does the reversing of my Skoda Kamiq make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult action. The sound made by the reversing of your Skoda Kamiq is logical. It can be explained in a fairly simple way. Indeed, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears used for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Indeed, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad idea. Indeed, the pressure you will exert on the gears will be monumental and you will produce a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely common if you hear a reverse noise on your Skoda Kamiq if you shift gear under these conditions.
Different Skoda Kamiq reversing noises and their causes
Finally in this section, we will move on to what you are probably most excited about in this document, to learn about the source of reversing noise on Skoda Kamiq. Here are the 3 typical sounds you may be victim of.
I experience a grinding noise when starting in reverse gear
If you experience a grinding noise when you start in reverse with your Skoda Kamiq, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore conceivable that due to their wear the silentblocks no longer absorb the engine vibrations well. In this circumstance, do not hesitate to check out this article for more information about strut mount noises on Skoda Kamiq.
An increased reverse knocking noise on Skoda KamiqX
If you are subject to a knocking noise when you are in reverse with your Skoda Kamiq and this noise tends to build up as you gain speed. It is conceivable that you are going through a serious trouble that needs to be solved rather quickly before ruining your entire gearbox. Indeed, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears very fast. Take your automobile to your mechanic quickly or browse this document about gearbox noise on Skoda Kamiq for more information.
I find out a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and relating to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Skoda Kamiq reverse gear makes more noise than before, it is conceivable that filings have been produced and are moving around in it. It is therefore time to empty the box.
