It is never pleasurable to hear a sound on your automobile that you don’t know where it comes from. You may be thinking about what to do when you notice a reversing gear noise that persists on your Seat Ateca? Any gearbox trouble can be severe, but before making sure, it is better to do a few checks. Our team has created this paper to support you fix it. First, we will see what the sources and the different gearbox noises can be on Seat Ateca, and second, what are the solutions available to you.
Classical reverse Seat Ateca noises and some tips to preserve your gearbox
Why does the reversing of my Seat Ateca make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult task. The sound caused by the reversing of your Seat Ateca is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears implemented for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad idea. In fact, the pressure you will put in on the gears will be enormous and you will produce a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely typical if you experience a reverse noise on your Seat Ateca if you shift gear under these conditions.
Diverse Seat Ateca reversing noises and their triggers
Finally in this section, we will move on to what you are probably most interested in this article, to learn about the cause of reversing noise on Seat Ateca. Here are the 3 typical noises you may be victim of.
I listen to a grinding noise when starting in reverse gear
If you hear a grinding noise when you start in reverse with your Seat Ateca, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations made by the gearbox are higher and it is therefore plausible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this situation, do not hesitate to consult this content page for more details about strut mount noises on Seat Ateca.
An increased reverse knocking noise on Seat AtecaX
If you are subject to a knocking noise when you are in reverse with your Seat Ateca and this noise tends to build up as you gain speed. It is plausible that you are confronting a serious trouble that needs to be fixed right away before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears in short order. Take your automobile to your auto mechanic quickly or browse this content about gearbox noise on Seat Ateca for more details.
I discover a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Seat Ateca reverse gear makes more noise than before, it is plausible that filings have been created and are moving around in it. It is therefore time to empty the box.
