It is never pleasant to hear a sound on your automobile that you don’t know where it comes from. You may be wondering what to do when you detect a reversing gear noise that persists on your Mini Countryman 2? Any gearbox trouble can be important, but before making sure, it is better to do a few inspections. Our team has written this content page to support you eliminate it. First, we will see what the sources and the different gearbox noises can be on Mini Countryman 2, and second, what are the solutions available to you.
Classical reverse Mini Countryman 2 noises and some tips to look after your gearbox
Why does the reversing of my Mini Countryman 2 make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult action. The noise made by the reversing of your Mini Countryman 2 is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears much less important than with spur gears chosen for the reverse gear.
Tips to limit wear on your clutch and gearbox
- Don’t give a big boost:
Certainly, if you kick the throttle hard when you are in reverse or when you put the automobile in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the automobile is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad choice. In fact, the pressure you will exert on the gears will be significant and you will create a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely typical if you hear a reverse noise on your Mini Countryman 2 if you shift gear under these conditions.
Several Mini Countryman 2 reversing noises and their origins
Finally in this section, we will move on to what you are probably most enthusiastic about in this article, to find out about the origin of reversing noise on Mini Countryman 2. Here are the 3 typical noises you may be victim of.
I hear a grinding noise when starting in reverse gear
If you hear a grinding noise when you start in reverse with your Mini Countryman 2, it may be the engine mounts that are tired. Indeed, when the engine is in reverse gear, due to the pinions we saw above the vibrations generated by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to consult this document for more information about strut mount noises on Mini Countryman 2.
An increased reverse knocking noise on Mini Countryman 2X
If you are subject to a knocking noise when you are in reverse with your Mini Countryman 2 and this noise tends to build up as you gain speed. It is possible that you are confronting a serious trouble that needs to be fixed fairly quickly before ruining your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will spread to the rest of the box and damage other gears before long. Take your automobile to your technician quickly or browse this document about gearbox noise on Mini Countryman 2 for more data.
I perceive a noise when I go in reverse
Listening a noise when you shift into reverse is normal and linked to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Mini Countryman 2 reverse gear makes more noise than before, it is possible that filings have been produced and are moving around in it. It is therefore time to empty the box.
