It is never pleasing to perceive a sound on your vehicle that you don’t know where it comes from. You may be questioning what to do when you notice a reversing gear noise that continues on your Ds Ds 7 Crossback? Any gearbox issue can be severe, but before making sure, it is better to do a few investigations. Our team has written this content page to support you eliminate it. First, we will see what the origins and the different gearbox noises can be on Ds Ds 7 Crossback, and second, what are the solutions available to you.
Classical reverse Ds Ds 7 Crossback noises and some tips to preserve your gearbox
Why does the reversing of my Ds Ds 7 Crossback make a different noise from my other speeds?
De facto, integrating all gears, bearings and pinions into a gearbox is a difficult process. The noise created by the reversing of your Ds Ds 7 Crossback is logical. It can be explained in a fairly simple way. In fact, the gears used for conventional speeds (1st to 5th or 6th) are so-called “helical” gears (oblique gears) . The use of such a pinion makes the noise caused by the gears less important than with spur gears implemented for the reverse gear.
Tips to reduce wear on your clutch and gearbox
- Don’t give a big boost:
In fact, if you kick the throttle hard when you are in reverse or when you put the vehicle in the revs, you risk to burn your clutch or gnawing at the gearbox pinions. - Never reverse while the vehicle is in motion or vice versa:
Reversing the direction of operation of the gearbox during operation is a very bad practice. In fact, the pressure you will put in on the gears will be enormous and you will make a premature wear and tear of the gears. You can even break the gears of your gearbox at speed by doing so. It will therefore be completely typical if you find out a reverse noise on your Ds Ds 7 Crossback if you shift gear under these conditions.
Several Ds Ds 7 Crossback reversing noises and their triggers
Finally in this section, we will move on to what you are probably most excited about in this document, to learn about the source of reversing noise on Ds Ds 7 Crossback. Here are the 3 typical noises you may be victim of.
I listen to a grinding noise when starting in reverse gear
If you perceive a grinding noise when you start in reverse with your Ds Ds 7 Crossback, it may be the engine mounts that are tired. Certainly, when the engine is in reverse gear, due to the pinions we saw above the vibrations produced by the gearbox are higher and it is therefore possible that due to their wear the silentblocks no longer absorb the engine vibrations well. In this case, do not hesitate to read this article for more info about strut mount noises on Ds Ds 7 Crossback.
An increased reverse knocking noise on Ds Ds 7 CrossbackX
If you are subject to a knocking noise when you are in reverse with your Ds Ds 7 Crossback and this noise tends to increase as you gain speed. It is possible that you are experiencing a serious issue that needs to be fixed quickly before wrecking your entire gearbox. In fact, an intensifying rattling noise means that the gears are damaged. If they are, debris will propagate to the rest of the box and damage other gears quickly. Take your vehicle to your auto mechanic quickly or read this document about gearbox noise on Ds Ds 7 Crossback for more data.
I discover a noise when I go in reverse
Experiencing a noise when you shift into reverse is normal and connected to the gears and sprockets used in the gearbox. If, on the other hand, you have the feeling that your Ds Ds 7 Crossback reverse gear makes more noise than before, it is possible that filings have been created and are moving around in it. It is therefore time to empty the box.
