Discovering a strange noise from your automobile does not tend to reassure, and although it can be not a big deal, it is also possible that it is a signal of a big failure on approach. Recognizing a noise originating from the rear end of your Fiat Bravo 2 may alert a trip to your garage sometime soon, like just a rock in the tread of a tire. To support you determine the causes, our team has produced this content which might support you to see more clearly. First, we will discover what the different noises and concerns linked to your Fiat Bravo 2 rear end noise are, and second, what your solutions are if the trouble is not included in this list.
Parts that can trigger noise in the rear end of my Fiat Bravo 2
Rear end loud noise Fiat Bravo 2
If you discern a loud noise on the rear end of your Fiat Bravo 2, it may be linked to your wheels. In fact, the wheels can be at the source of this vibration. Two possibilities are then possible, firstly, wheel balancing may be defective (loss of lead weight which fulfils this purpose), which contributes to an imbalance in the wheel’s logical path and therefore its vibration. To check this, take a look at look at the presence of your balancing seals on your rims. Finally, it is also possible that a deformed or pre-used tyre may have the same types of symptoms and triggers this rear end lound noise on your Fiat Bravo 2. The deformation of a tyre, following an impact for example, will cause it to stick poorly to the ground and therefore noise will arise. Whatever the case, please remember to examine the tread and sidewall of your tires. Another possibility is that your exhaust pipehas a hole in it or a collar has become loose. Remember to go under your Fiat Bravo 2 while the engine is running and examine the sound of your exhaust pipe to discern possible exhaust gas leaks. If you note of a loud noise but the cause is not present here, we suggest that you read this content page relating to loud noise on Fiat Bravo 2, which could give you more ideas.
Rear end noise slamming Fiat Bravo 2 caused by your suspension
If you experience a clicking noise on the rear axle of your Fiat Bravo 2, it is possible that the suspension part of your automobile may be affected. In fact, when the steering unit of your automobile is activated, the damping unit of your automobile may be the cause of the trouble. In fact, it is not exceptional for the shock absorber cup to be out of order or for the shock absorber bearings to be out of order. Remember to examine the state of these two units. For more information, see our article on suspension noise on Fiat Bravo 2.
Squeaky noise rear end Fiat Bravo 2 provided by your bearings
A squeaking noise in the rear end of your Fiat Bravo 2 can also derive from precipitate wear of your bearings. In fact, bearings have a fundamental purpose in the proper handling of the automobile while driving. When you turn strongly, at high or low speed and bring the direction to a stop, the pressure exerted on the bearings is higher than if you turn slowly, it can generate sounds close to a creaking sound if they are worn. Remember to examine their state. If you want more info about bearing noise on Fiat Bravo 2, it’s here.
What if I still haven’t solved the rear end noise of my Fiat Bravo 2
If you still haven’t found a solution despite the different alternatives described here and the noise from the rear end of your Fiat Bravo 2 remains, it is possible that the trouble is linked to other mechanical units and that this failure is less common. Feel free to consult this article on suspension noise on Fiat Bravo 2 which will eventually give you other ideas to support you solve your trouble. Do not leave this trouble lying around in any case and take your car to your auto technician to preserve your automobile and your safety.
