Listening a mysterious noise from your car does not tend to reassure, and although it can be not a big deal, it is also possible that it is an indication of an important breakdown on approach. Identifying a noise originating from the rear end of your Hyundai Kona may alert a stopover at your mechanic sooner or later, like just a rock in the tread of a wheel. To help you check out the causes, our team has made this content which might help you to see more clearly. First, we will discover what the different noises and problems connected to your Hyundai Kona rear end noise are, and second, what your solutions are if the problem is not included in this list.
Components that can generate noise in the rear end of my Hyundai Kona
Rear end loud noise Hyundai Kona
If you notice a loud noise on the rear end of your Hyundai Kona, it may be linked to your wheels. In fact, the wheels can be at the origin of this vibration. Two possibilities are then possible, first of all, wheel balancing may be faulty (loss of lead weight which fulfils this purpose), which causes an imbalance in the wheel’s logical path and therefore its vibration. To verify this, examine look at the presence of your balancing seals on your rims. Finally, it is also possible that a deformed or pre-used tyre may have the same types of symptoms and causes this rear end lound noise on your Hyundai Kona. The deformation of a tyre, following an impact for example, will cause it to stick poorly to the ground and therefore noise will emerge. In any case, remember to verify the tread and sidewall of your tires. Another possibility is that your exhaust pipehas a hole in it or a collar has become loose. Bear in mind to go under your Hyundai Kona while the engine is running and verify the sound of your exhaust pipe to find possible exhaust gas leaks. If you acknowledge of a loud noise but the cause is not present here, we suggest that you read this document about loud noise on Hyundai Kona, which will probably give you more ideas.
Rear end noise slamming Hyundai Kona caused by your suspension
If you identify a clicking noise on the rear axle of your Hyundai Kona, it is possible that the suspension part of your car may be affected. In fact, when the steering unit of your car is activated, the damping unit of your car may be the cause of the problem. In fact, it is not uncommon for the shock absorber cup to be out of order or for the shock absorber bearings to be out of order. Bear in mind to verify the condition of these two units. For more information, browse our article on suspension noise on Hyundai Kona.
Squeaky noise rear end Hyundai Kona provided by your bearings
A squeaking noise in the rear end of your Hyundai Kona can also originate from precipitate wear of your bearings. In fact, bearings have an important purpose in the proper handling of the car while driving. When you turn strongly, at high or low speed and bring the direction to a stop, the pressure applied on the bearings is higher than if you turn slowly, it can make sounds close to a creaking sound if they are worn. Bear in mind to verify their condition. If you want more info about bearing noise on Hyundai Kona, it’s here.
What if I still haven’t find a solution for the rear end noise of my Hyundai Kona
If you still haven’t found an answer despite the different alternatives described here and the noise from the rear end of your Hyundai Kona lasts, it is possible that the problem is linked to other mechanical units and that this failure is less common. Feel free to browse this content page on suspension noise on Hyundai Kona which will eventually give you other ideas to help you solve your problem. Do not leave this problem lying around in any case and take your car to your mechanic to preserve your car and your safety.
