It happens sometimes that your car makes noises from your brakes, you are rarely reassured by this sorts of noise and you instantly tend to think that you will have an accident or that the fix will cost you an astronomical amount. So, what if you discover noise from the brake on your Toyota Auris 2? It is probably not some thing major and you might have the capability to repair it yourself, but when in doubt, as with such trouble your safety and the one from other is in question, it is better to verify before a more serious failure occurs. It’s with idea in mind that we have decided to write this article and give you the chance to locate the trouble and find a solution. We will go through different steps, review all possible sources of brake noise on Toyota Auris 2, and offer you the causes for them in order to assist you fix the trouble.
The different sort of brake noise Toyota Auris 2 and their triggers
The function of the Toyota Auris 2 brakes is to come slow down and stop your vehicule. This component is an important part of your vehicle’s safety. Experiencing a noise from it must therefore be looked into immediately and leaving it lying around is not a good solution.
I listen a grinding noise on my brake Toyota Auris 2
If you perceive a grinding or scrap metal noise coming from the brake of your Toyota Auris 2, it is highly imaginable that it will be related to brake pads at the end of their life, in fact, the purpose of the pads is to act as a buffer during braking and they will therefore logically wear out with time. Each producer gives an average runtime in kilometres for pads, but based on your driving style and route, this may vary. Take off the wheels in question and verify the wear indicator on them. If they are dead, they must be changed quickly as they will very easily damage your discs and keep doing this scrap or grinding noise on Toyota Auris 2. If after verifying this point, you’re still feeling a grinding noise on your Toyota Auris 2, have a look at this article to find a solution.
I encounter a regular noise that stops when I brake with my Toyota Auris 2
If you experience a continual noise from the brakes Toyota Auris 2 that only stops when you press your brake system, it is quite plausible that caliper wear is the reason. Indeed, they can jam with time, specifically if they are not used enough. In this case, they will tend to keep on being in the closed position, so they will always stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to think about changing them.
I encounter vibration when I brake with my Toyota Auris 2
If in your situation, you encounter a vibration when braking that would have come from the brake your Toyota Auris 2, you will have to be concerned about the state of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be replaced at some point. A vibration most often notifies of veiled brake disc, you can verify it by disassembling your wheels. If so, replace them or have them replaced by your auto mechanic.
I experience a squealing noise when I brake with my Toyota Auris 2
Finally, if you ewperience a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Toyota Auris 2, creating a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
