Being subject to recurring noise on your car tends to be irritating, a car is so elaborate that it is generally difficult to locate its origin and even more so to find the part that causes it. If you have already experienced a clicking noise on your Toyota Auris, we will most likely be able to support you. Indeed, our editorial staff decided to compose this content page in order to review the main causes of a clicking noise on Toyota Auris. This is why, firstly, we will see what are the causes of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the origins of clicking noise on Toyota Auris coming from your suspensions.
I discover a clicking noise on Toyota Auris from my engine
Examine your high engine
If you discover a clicking noise on Toyota Auris, and this noise is based at the top of the engine, it means that it originates from your cylinder head and its associated parts. Two parts can be the triggers of these ticking noises on Toyota Auris. Either the hydraulic pushers , in most cases it is because of their faulty “hydraulic catch-up” system that we will perceive these clicking noises, generally when cold and go away when hot. Otherwise, it is the interplay of your rocker arms or their state of wear that is at issue. In this case, remember to change them.
Examine your low engine
If you have distinguished the zone of source of the Toyota Auris clikcing noises coming from your low engine, it may be that your rods or piston shafts are the triggers. In both circumstances, the risk in the long term is the breakage of the motor. These two fixes are very difficult and most mechanics will advise you to change the engine of your Toyota Auris.
Combustion problem
Finally, if you have the feeling that this clicking noise on Toyota Auris is related to the combustion of your engine, there are three possible origins of it. Examine the condition of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is possible that your timing belt is shifted and that it does not properly manage the timing of the various engine elements to promote good combustion. And finally, the most classic trigger, comes from your injection, which is either blocked or one or more injectors are destroyed. In this circumstance, do not hesitate to check this content page which deals in detail with the different injection sounds on Toyota Auris.
I discover a clicking noise on Toyota Auris in my direction
Examine the condition of the gimbals
One of the most common causes of a clicking noises in the direction of your Toyota Auris is related to the direction of the car. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can make a ticking type of sound when you approach the stop zone of your steering. A bellows with holes will harm the cardan shaft very quickly and must be swapped very quickly, otherwise the entire cardan shaft will have to be swapped. Consider taking a look at it. If you would like more detailed information about gimbals noises on Toyota Auris, do not hesitate to consult this complete guide.
Examine the rest of your direction
Finally, when you experience a clicking noise on your Toyota Auris, it is possible that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the circumstance, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I discover a clicking noise on Toyota Auris coming from my suspensions
Examine the suspension
If you experience a clicking noise on your Toyota Auris once you pass a speed bump, it is very possible that your suspension block is the induce of the noise. Indeed, it may be the suspension cups, which, when they are outdated, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its task and during small jolts that compress the suspensions. To examine if this is the problem that concerns you, take a dented road and, at low speed, pay attention to the noise coming from your front axle when ever you pass over holes. If these are the cups, consider changing them quickly as this may affect other parts and require more expensive repairs.
Check spring and cylinder
If you hear a clicking noise on your Toyota Auris at the suspension level, it is highly possible that spring wear or shock cylinder deformation may be a explanation. To examine the state of the spring, position the vehicle on a flat surface and measure that the heights from the ground to the bottom of the body are equivalent on each side (empty car for measurement). You can also examine between the front and rear, if there is a gap too large it suggests that that most likely your springs are worn, if you see a leak go a little further in the article to have the answer to this problem. For the cylinder the verification is visual, ensure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should consider replacing it or them. If you have the feeling that this noise is more like a squeaking noise on Toyota Auris than a clicking noise, don’t hesitate to consult this article.
