Being subject to repeated noise on your vehicle tends to be frustrating, a vehicle is so elaborate that it is constantly difficult to find its origin and even more so to find the part that produces it. If you have already experienced a clicking noise on your Volkswagen T-Cross, we will most likely be able to help you. In fact, our editorial staff decided to compose this content page in order to review the main causes of a clicking noise on Volkswagen T-Cross. This is why, firstly, we will check out what are the origins of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the sources of clicking noise on Volkswagen T-Cross coming from your suspensions.
I hear a clicking noise on Volkswagen T-Cross located on my engine
Examine your high engine
If you hear a clicking noise on Volkswagen T-Cross, and this noise is based at the top of the engine, it means that it originates from your cylinder head and its accompanying parts. Two elements can be the triggers of these ticking noises on Volkswagen T-Cross. Either the hydraulic pushers , in most cases it is because of their faulty “hydraulic catch-up” system that we will perceive these clicking noises, often when cold and go away when hot. Otherwise, it is the interplay of your rocker arms or their state of wear that is at issue. In this circumstance, remember to change them.
Examine your low engine
If you have identified the zone of origin of the Volkswagen T-Cross clikcing noises coming from your low engine, it may be that your rods or piston shafts are the triggers. In both circumstances, the risk in the long term is the breakage of the motor. These two maintenance are very complex and most mechanics will encourage you to change the engine of your Volkswagen T-Cross.
Combustion problem
Finally, if you have the feeling that this clicking noise on Volkswagen T-Cross is connected to the combustion of your engine, there are three possible causes of it. Examine the state of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is conceivable that your timing belt is shifted and that it does not properly manage the timing of the various engine components to promote good combustion. And finally, the most classic reason, comes from your injection, which is either blocked or one or more injectors are destroyed. In this case, do not hesitate to read this content page which deals in detail with the different injection sounds on Volkswagen T-Cross.
I hear a clicking noise on Volkswagen T-Cross in my direction
Examine the state of the gimbals
One of the most common causes of a clicking noises in the direction of your Volkswagen T-Cross is linked with the direction of the vehicle. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can create a ticking type of sound when you get closer to the stop zone of your steering. A bellows with holes will harm the cardan shaft very quickly and must be swapped very quickly, otherwise the entire cardan shaft will have to be swapped. Consider taking a look at it. If you would like more detailed information about gimbals noises on Volkswagen T-Cross, do not hesitate to read this complete guide.
Examine the rest of your direction
Finally, when you experience a clicking noise on your Volkswagen T-Cross, it is conceivable that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the case, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I hear a clicking noise on Volkswagen T-Cross coming from my suspensions
Examine the suspension
If you encounter a clicking noise on your Volkswagen T-Cross when you pass a speed bump, it is really conceivable that your suspension block is the cause of the noise. In fact, it may be the suspension cups, which, when they are out of date, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its role and during small jolts that compress the suspensions. To check if this is the issue that worries you, take a dented road and, at low speed, listen to the noise originating from your front axle when ever you pass over holes. If these are the cups, consider changing them as soon as possible as this may damage other parts and require more expensive repairs.
Check spring and cylinder
If you are subject to a clicking noise on your Volkswagen T-Cross at the suspension level, it is highly conceivable that spring wear or shock cylinder deformation may be a cause. To check the condition of the spring, place the automobile on a flat surface and measure that the heights from the ground to the bottom of the body are equivalent on each side (empty car for measurement). You can also check between the front and rear, if there is a gap too large it means that most likely your springs are worn, if you find out a leak go a little further in the article to have the solution to this problem. For the cylinder the verification is visual, ensure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should think about swapping it or them. If you have the feeling that this noise is more like a squeaking noise on Volkswagen T-Cross than a clicking noise, don’t hesitate to consult this article.
