Being subject to constant noise on your vehicle tends to be annoying, a vehicle is so elaborate that it is usually difficult to determine its origin and even more so to find the part that produces it. If you have already experienced a clicking noise on your Toyota Auris 2, we will almost certainly be able to help you. Indeed, our editorial staff decided to compose this content page in order to review the main causes of a clicking noise on Toyota Auris 2. This is why, firstly, we will look at what are the causes of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the sources of clicking noise on Toyota Auris 2 coming from your suspensions.
I find out a clicking noise on Toyota Auris 2 located on my engine
Verify your high engine
If you find out a clicking noise on Toyota Auris 2, and this sound is located at the top of the engine, it means that it originates from your cylinder head and its associated parts. Two parts can be the triggers of these ticking noises on Toyota Auris 2. Either the hydraulic pushers , in general it is because of their faulty “hydraulic catch-up” system that we will perceive these clicking noises, often when cold and disappear when hot. Otherwise, it is the interplay of your rocker arms or their condition of wear that is at issue. In this case, remember to change them.
Verify your low engine
If you have founded the spot of source of the Toyota Auris 2 clikcing noises coming from your low engine, it may be that your rods or piston shafts are the triggers. In both cases, the risk in the long term is the breakage of the motor. These two fixes are very difficult and most mechanics will suggest you to replace the engine of your Toyota Auris 2.
Combustion problem
Finally, if you have the feeling that this clicking noise on Toyota Auris 2 is in connection with the combustion of your engine, there are three possible triggers of it. Verify the state of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is conceivable that your timing belt is shifted and that it does not properly manage the timing of the various engine components to promote good combustion. And finally, the most classic reason, comes from your injection, which is either blocked or one or more injectors are injured. In this case, do not hesitate to check this content page which deals in detail with the different injection sounds on Toyota Auris 2.
I find out a clicking noise on Toyota Auris 2 in my direction
Verify the state of the gimbals
One of the most basic reasons of a clicking noises in the direction of your Toyota Auris 2 is connected to the direction of the vehicle. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can create a ticking type of sound when you approach the stop zone of your steering. A bellows with holes will damage the cardan shaft very quickly and must be changed rapidly, otherwise the entire cardan shaft will have to be changed. Consider taking a look at it. If you would like more detailed information about gimbals noises on Toyota Auris 2, do not hesitate to consult this complete guide.
Verify the rest of your direction
Finally, when you experience a clicking noise on your Toyota Auris 2, it is conceivable that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the case, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I find out a clicking noise on Toyota Auris 2 coming from my suspensions
Verify the suspension
If you encounter a clicking noise on your Toyota Auris 2 each time you pass a speed bump, it is really conceivable that your suspension block is the reason of the sound. Indeed, it may be the suspension cups, which, when they are outdated, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its function and during small jolts that compress the suspensions. To check if this is the issue that concerns you, take a dented road and, at low speed, listen to the sound originating from your front axle when you pass over holes. If these are the cups, consider changing them quickly as this may affect other parts and require more expensive repairs.
Check spring and cylinder
If you are subject to a clicking noise on your Toyota Auris 2 at the suspension level, it is widely conceivable that spring wear or shock cylinder deformation may be a explanation. To check the condition of the spring, position the vehicle on a flat surface and measure that the heights from the ground to the bottom of the body are equivalent on each side (empty car for measurement). You can also check between the front and rear, if there is a gap too significant it means that most likely your springs are worn, if you see a leak go a little further in the article to have the answer to this problem. For the cylinder the verification is visual, ensure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should think about swapping it or them. If you have the feeling that this noise is more like a squeaking noise on Toyota Auris 2 than a clicking noise, don’t hesitate to consult this article.
