Do you hear a metallic noise on your Nissan Pulsar once you drive? We know that this is not pleasant and that you are wandering. Listening such a noise is not always a good sign, but it may also be nothing major. To support you solve this trouble, our team has decided to produce this content to assist you in this investigation. In order to perform this research as accurately as possible, we will first look into the conceivable origins of metallic noise in the front of your vehicle, and then, if the metallic noise comes from the rear of your vehicle.
Metal noise Nissan Pulsar coming from the front end of the vehicle
I listen to a metal rattling noise coming from wheels
- Metallic noise based on your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely triggers of metal noise manifestations on your Nissan Pulsar, may be that one of your bearing is tired, it will commonly generate a loud noise that increase when stressed (turns faster and faster). So remember to examine by taking speed (neutral gear and window open to be aware only to noise of the wheels) that the noise is well established here, if this is the case change it or them promptly. If, on the other hand, this noise only manifests itself with an engaged speed, read this report on loud noise on Nissan Pulsar, you will most likely find a solution to your trouble.
If you hear a metalic noise on Nissan Pulsar and you have the feeling that it comes from your front wheels, it is highly conceivable that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will make a strong metallic friction noise that you will inevitably feel. To examine this, put your vehicle on safety stand, and examine the condition of your discs and pads by removing the wheel. If they are involved, change them promptly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your vehicle, and you want explications about it, go through this guide for more details about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you listen to a metallic noise on your Nissan Pulsar, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will cause a metallic snap when they hit or change direction. To examine this, put yourself under your vehicle, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be changed. If this is your case, we suggest that you read this content for a complete guide about steering noises on Nissan Pulsar.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are weakened, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Nissan Pulsar. Once screwed up, they will no longer fulfill their task as shock absorbers and, with each impact, or violent acceleration, a noise will appear. Therefore, please remember to examine their status and change them if required. Feel free to browse this content which is a complete file about strut mounts noises on Nissan Pulsar, how to examine their condition and change them.
Finally, the last basic reason of metallic noise on Nissan Pulsar. It’s because your transmission system is the source. It is conceivable, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then develop a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we suggest that you look at this detailed guide on the origins of steering noises on Nissan Pulsar.
Metallic noise Nissan Pulsar coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you hear an exhaust noise that is more of a metallic type, it is conceivable that one or more parts of your exhaust may be damaged. In fact, it is conceivable that either the catalyst or the silencer may be the reason of this noise. To be sure, go under the vehicle, cold, and knock each of the previously stated parts with a hammer to identify the source of the noise. You should acknowledge things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to consider changing it, as well as the silencer. In cases like this, to eliminate the metallic noise on your Nissan Pulsar, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your vehicle, it is conceivable that with wear they are at the origin of your metallic noises on your Nissan Pulsar. Go a little further up in the content where you will find details of the solution already exposed for the front part of the vehicle.
Finally, if the noise originates from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
