Do you hear a metallic noise on your Mercedes Vito when ever you drive? We can understand that this is not enjoyable and that you are wandering. Hearing such a noise is not always a good signal, but it may also be nothing severe. To support you remedy this trouble, we have decided to write this content page to help you in this research. In order to carry out this research as effectively as possible, we will first look at the possible sources of metallic noise in the front of your vehicle, and then, if the metallic noise comes from the rear of your vehicle.
Metal noise Mercedes Vito coming from the front end of the vehicle
I experience a metal rattling noise coming from wheels
- Metallic noise originating from your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the possible triggers of metal noise manifestations on your Mercedes Vito, may be that one of your bearing is tired, it will commonly produce a loud noise that increase when stressed (turns faster and faster). So bear in mind to check by taking speed (neutral gear and window open to pay attention only to noise of the wheels) that the noise is well located here, if this is the case replace it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, read this guide on loud noise on Mercedes Vito, you will most likely find a solution to your trouble.
If you discern a metalic noise on Mercedes Vito and you have the feeling that it comes from your front wheels, it is highly possible that it is your pads or discs that are the trigger. In fact, a disc or a set of dead plates will make a strong metallic friction noise that you will inevitably feel. To check this, put your vehicle on safety stand, and check the condition of your discs and pads by getting rid of the wheel. If they are involved, replace them promptly , otherwise you will no longer be able to brake. If you experience a metallic noise from your vehicle, and you want explications about it, examine this article for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you experience a metallic noise on your Mercedes Vito, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will cause a metallic snap when they hit or change direction. To check this, position yourself under your vehicle, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be replaced. If this is your case, we recommend that you consult this content page for a complete guide about steering noises on Mercedes Vito.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are damaged, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Mercedes Vito. Once screwed up, they will no longer fulfill their function as shock absorbers and, with each impact, or violent acceleration, a noise will appear. Therefore, remember to check their status and replace them if required. Feel free to read this content page which is a complete file about strut mounts noises on Mercedes Vito, how to check their condition and replace them.
Finally, the last typical trigger of metallic noise on Mercedes Vito. It’s because your transmission system is the source. It is plausible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then create a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we recommend that you look at this detailed guide on the origins of steering noises on Mercedes Vito.
Metallic noise Mercedes Vito coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you experience an exhaust noise that is more of a metallic type, it is possible that one or more parts of your exhaust may be damaged. In fact, it is possible that either the catalyst or the silencer may be the trigger of this noise. To be sure, go under the vehicle, cold, and knock each of the previously stated components with a hammer to determine the source of the noise. You should hear things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to consider changing it, as well as the silencer. In such a case, to stop the metallic noise on your Mercedes Vito, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your vehicle, it is possible that with wear they are at the origin of your metallic noises on your Mercedes Vito. Go a little further up in the document where you will find details of the solution already exposed for the front part of the vehicle.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
