Do you listen to a metallic noise on your Hyundai Ix20 once you drive? We understand that this is not pleasant and that you are wandering. Experiencing such a noise is not always a good signal, but it may also be nothing major. To help you resolve this trouble, we have decided to create this content page to help you in this research. In order to conduct this research as efficiently as possible, we will first look at the conceivable origins of metallic noise in the front of your vehicle, and then, if the metallic noise comes from the rear of your vehicle.
Metal noise Hyundai Ix20 coming from the front end of the vehicle
I experience a metal rattling noise coming from wheels
- Metallic noise caused by your bearing
- Metalic noise coming from brake
- Stabilizer bar worn
One of the most likely causes of metal noise symptoms on your Hyundai Ix20, may be that one of your bearing is tired, it will frequently make a loud noise that increase when stressed (turns faster and faster). So keep in mind to examine by taking speed (neutral gear and window open to pay attention only to noise of the wheels) that the noise is well located here, if this is the case change it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, browse this guide on loud noise on Hyundai Ix20, you will most likely find a remedy to your trouble.
If you hear a metalic noise on Hyundai Ix20 and you have the feeling that it comes from your front wheels, it is highly conceivable that it is your pads or discs that are the trigger. Indeed, a disc or a set of dead plates will make a strong metallic friction noise that you will inevitably feel. To examine this, put your vehicle on safety stand, and examine the state of your discs and pads by taking away the wheel. If they are involved, change them promptly , otherwise you will no longer be able to brake. If you feel a metallic noise from your vehicle, and you want infos about it, browse this article for more info about brake noises on xxx.
If it is rather when you are turning, passing over a bump or sidewalk that you experience a metallic noise on your Hyundai Ix20, then your rods may be worn. Whether it is the steering or the stabilizer bar, their wear will cause a metallic snap when they hit or change direction. To examine this, put yourself under your vehicle, without the wheels, and move your rods, if they only oppose very little force it is likely that they will have to be changed. If this is your case, we advise that you read this content page for a complete guide about steering noises on Hyundai Ix20.
Other sources
>
- Engine silentblock
- Dead gearbox, or broken pinion
A little like worn stabilizer bar, if your engine silent blocks are harmed, you will feel as you pass over damaged roads or sidewalks, loud metallic noises on your Hyundai Ix20. Once screwed up, they will no longer accomplish their function as shock absorbers and, with each impact, or violent acceleration, a noise will appear. Therefore, please remember to examine their status and change them if needed. Feel free to consult this content page which is a complete file about strut mounts noises on Hyundai Ix20, how to examine their state and swap them.
Finally, the last common trigger of metallic noise on Hyundai Ix20. It’s because your transmission system is the origin. It is possible, either because of improper use of the gearbox or because of excessive wear, that some gears in your gearbox have broken and are wandering around in it. They will then create a continuous metal rattling noise. That you shouldn’t feel in neutral. If this is your case, we advise that you browse this detailed guide on the sources of steering noises on Hyundai Ix20.
Metallic noise Hyundai Ix20 coming from the rear end of the vehicle
Exhaust pipe
If, on the other hand, you experience an exhaust noise that is more of a metallic type, it is conceivable that one or more parts of your exhaust may be damaged. Indeed, it is conceivable that either the catalyst or the silencer may be the trigger of this noise. To be sure, go under the vehicle, cold, and knock each of the previously stated units with a hammer to identify the origin of the noise. You should notice things moving in the problematic part, if it’s the exhaust baffles, you can try to hammer in the section a little to try to block them and limit their movements. If it is a dead catalyst, it will be required to consider replacing it, as well as the silencer. In such a case, to eliminate the metallic noise on your Hyundai Ix20, you will either have to find a second hand one and do it yourself, or go to your mechanic.
Noise from wheels
- Bearings
- Brake pads or discs
As for the bearings of your vehicle, it is conceivable that with wear they are at the origin of your metallic noises on your Hyundai Ix20. Go a little further up in the article content where you will find information of the solution already exposed for the front part of the vehicle.
Finally, if the noise comes from your discs brakes or pads, you should refer to the part in question in the first section of this manual.
