It occurs sometimes that your car makes noises in the brake calipers, you are rarely reassured by this sort of noise and you immediately tend to think that you will have an incident or that the fix will cost you an substantial amount. So, what if you identify noise from the brake calipers on your Renault Megane 2? It is probably not some thing severe and you may be able to solve it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to check before a more serious failure happens. It is with this in mind that we have made the decision to write this article and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Renault Megane 2, and give you the explanations for them in order to help you fix the trouble.
The different types of brake caliper noise on Renault Megane 2 and their causes
The function of the Renault Megane 2 brake calipers is to come pinch the brake discs of your Renault Megane 2 thanks to the pads they will activate. This element is an important element of your vehicle’s safety. Finding out a noise from it must therefore be investigated right away and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Renault Megane 2
If you hear a grinding or scrap metal noise coming from the brake calipers of your Renault Megane 2, it is highly conceivable that it will be connected to brake pads at the end of their life, indeed, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be replaced quickly as they will promptly affect your discs and keep doing this scrap or grinding noise on Renault Megane 2. If after checking this point, you’re still going through a grinding noise on your Renault Megane 2, have a look at this article to find a solution.
I feel a constant noise that stops when I brake from my Renault Megane 2 brake calipers
If you are the victim of a constant noise in the brake calipers of your Renault Megane 2 that only stops when you press your brake system, it is quite plausible that caliper wear is the reason. In fact, they can jam after some time, especially if they are not employed enough. When this happens, they will tend to stay on in the closed situation, so they will always stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Renault Megane 2
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Renault Megane 2, you will have to worry about the state of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be swapped at some point. A vibration most often shows of veiled brake disc, you can check it by removing your wheels. If so, replace them or have them replaced by your auto mechanic.
When I brake, I feel a squealing in my brake calipers of my Renault Megane 2
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Renault Megane 2, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
