It happens occasionally that your automobile makes noises in the brake calipers, you are rarely reassured by this sort of noise and you instantly tend to think that you will have an accident or that the repair will cost you an substantial amount. So, what if you discover noise from the brake calipers on your Nissan Pulsar? It most likely is not some thing severe and you may be able to repair it yourself, but when in doubt, since your safety and the one of others is in question, it is better to examine before a more serious failure happens. It is with this in mind that we have made the decision to write this document and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Nissan Pulsar, and give you the reasons for them in order to help you solve the issue.
The different types of brake caliper noise on Nissan Pulsar and their causes
The function of the Nissan Pulsar brake calipers is to come pinch the brake discs of your Nissan Pulsar thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Experiencing a sound from it must therefore be examined immediately and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Nissan Pulsar
If you perceive a grinding or scrap metal noise coming from the brake calipers of your Nissan Pulsar, it is highly imaginable that it will be connected to brake pads at the end of their existence, in fact, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each company gives an average runtime in kilometres for pads, but depending on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be changed quickly as they will quickly affect your discs and keep doing this scrap or grinding noise on Nissan Pulsar. If after examining this point, you’re still enduring a grinding noise on your Nissan Pulsar, have a look at this article to find a solution.
I experience a continuous noise that stops when I brake from my Nissan Pulsar brake calipers
If you are the victim of a uninterrupted noise in the brake calipers of your Nissan Pulsar that only stops when you press your brake system, it is quite conceivable that caliper wear is the cause. Indeed, they can jam as time passes, especially if they are not used enough. In this case, they will tend to stay in the closed position, so they will always stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Nissan Pulsar
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Nissan Pulsar, you will have to feel concerned about the state of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be swapped at some point. A vibration most often informs of veiled brake disc, you can check it by removing your wheels. If so, replace them or have them replaced by your auto technician.
When I brake, I experience a squealing in my brake calipers of my Nissan Pulsar
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Nissan Pulsar, causing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
