It appears occasionally that your automobile makes noises in the brake calipers, you are certainly not reassured by this sort of noise and you immediately tend to think that you will have an incident or that the repair will cost you an substantial amount of money. So, what if you detect noise from the brake calipers on your Fiat Tipo? It may not be anything severe and you may be able to solve it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have chosen to create this content and give you the chance to locate the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Fiat Tipo, and give you the causes for them in order to help you fix the problem.
The different types of brake caliper noise on Fiat Tipo and their causes
The objective of the Fiat Tipo brake calipers is to come pinch the brake discs of your Fiat Tipo thanks to the pads they will activate. This component is an fundamental element of your vehicle’s safety. Finding out a sound from it must therefore be analyzed immediately and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Fiat Tipo
If you listen to a grinding or scrap metal noise coming from the brake calipers of your Fiat Tipo, it is highly imaginable that it will be related to brake pads at the end of their existence, indeed, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each producer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may fluctuate. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be changed quickly as they will very easily ruin your discs and keep doing this scrap or grinding noise on Fiat Tipo. If after verifying this point, you’re still encountering a grinding noise on your Fiat Tipo, have a look at this article to find a solution.
I experience a continuous noise that stops when I brake from my Fiat Tipo brake calipers
If you are the victim of a continuous noise in the brake calipers of your Fiat Tipo that only stops when you press your brake system, it is quite plausible that caliper wear is the cause. Indeed, they can jam with time, especially if they are not employed enough. In such a case, they will tend to keep on being in the closed situation, so they will always stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Fiat Tipo
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Fiat Tipo, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be substituted at some point. A vibration most often notifies of veiled brake disc, you can check it by disassembling your wheels. If so, swap them or have them replaced by your mechanic.
When I brake, I experience a squealing in my brake calipers of my Fiat Tipo
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Fiat Tipo, producing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
