It happens in some cases that your automobile makes noises in the brake calipers, you are almost never reassured by this sort of noise and you immediately tend to think that you will have an incident or that the fix will cost you an substantial amount of money. So, what if you discern noise from the brake calipers on your Bmw Serie 5? It is probably not anything severe and you may be able to repair it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have chosen to create this article and give you the chance to find out the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Bmw Serie 5, and give you the reasons for them in order to help you fix the issue.
The different types of brake caliper noise on Bmw Serie 5 and their causes
The objective of the Bmw Serie 5 brake calipers is to come pinch the brake discs of your Bmw Serie 5 thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Experiencing a sound from it must therefore be investigated right away and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Bmw Serie 5
If you listen to a grinding or scrap metal noise coming from the brake calipers of your Bmw Serie 5, it is highly imaginable that it will be caused by brake pads at the end of their life, in fact, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each producer gives an average runtime in kilometres for pads, but according to your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be swapped quickly as they will promptly affect your discs and keep doing this scrap or grinding noise on Bmw Serie 5. If after checking out this point, you’re still having a grinding noise on your Bmw Serie 5, have a look at this article to find a solution.
I encounter a continuous noise that stops when I brake from my Bmw Serie 5 brake calipers
If you are the victim of a uninterrupted noise in the brake calipers of your Bmw Serie 5 that only stops when you press your brake system, it is quite possible that caliper wear is the reason. Indeed, they can jam after some time, especially if they are not used enough. In this case, they will tend to stay in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Bmw Serie 5
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Bmw Serie 5, you will have to worry about the state of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be substituted at some point. A vibration most often shows of veiled brake disc, you can check it by removing your wheels. If so, replace them or have them replaced by your auto technician.
When I brake, I encounter a squealing in my brake calipers of my Bmw Serie 5
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Bmw Serie 5, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
