It happens in some cases that your car makes noises in the brake calipers, you are rarely reassured by this kind of noise and you instantly tend to think that you will have an accident or that the fix will cost you an astronomical amount. So, what if you detect noise from the brake calipers on your Mitsubishi Eclipse? It might not be anything severe and you may be able to repair it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to examine before a more serious failure happens. It is with this in mind that we have chosen to create this content and give you the opportunity to locate the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Mitsubishi Eclipse, and give you the explanations for them in order to help you resolve the problem.
The different types of brake caliper noise on Mitsubishi Eclipse and their causes
The objective of the Mitsubishi Eclipse brake calipers is to come pinch the brake discs of your Mitsubishi Eclipse thanks to the pads they will activate. This component is an fundamental element of your vehicle’s safety. Hearing a sound from it must therefore be examined promptly and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Mitsubishi Eclipse
If you notice a grinding or scrap metal noise coming from the brake calipers of your Mitsubishi Eclipse, it is highly imaginable that it will be caused by brake pads at the end of their life, actually, the purpose of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each company gives an average runtime in kilometres for pads, but according to your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be replaced quickly as they will quickly ruin your discs and keep doing this scrap or grinding noise on Mitsubishi Eclipse. If after checking this point, you’re still having a grinding noise on your Mitsubishi Eclipse, have a look at this article to find a solution.
I feel a continuous noise that stops when I brake from my Mitsubishi Eclipse brake calipers
If you are the victim of a uninterrupted noise in the brake calipers of your Mitsubishi Eclipse that only stops when you press your brake system, it is quite plausible that caliper wear is the reason. In fact, they can jam over time, especially if they are not employed enough. In this case, they will tend to keep on being in the closed situation, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Mitsubishi Eclipse
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Mitsubishi Eclipse, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be changed at some point. A vibration most often informs of veiled brake disc, you can check it by removing your wheels. If so, change them or have them replaced by your technician.
When I brake, I feel a squealing in my brake calipers of my Mitsubishi Eclipse
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Mitsubishi Eclipse, causing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
