It happens sometimes that your automobile makes noises in the brake calipers, you are almost never reassured by this kind of noise and you instantly tend to think that you will have an incident or that the repair will cost you an substantial amount. So, what if you detect noise from the brake calipers on your Kia Rio 3? It is probably not some thing serious and you may be able to fix it yourself, but when in doubt, since your safety and the one of others is in question, it is better to examine before a more serious failure happens. It is with this in mind that we have made the decision to compose this document and give you the chance to locate the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Kia Rio 3, and give you the reasons for them in order to help you resolve the issue.
The different types of brake caliper noise on Kia Rio 3 and their causes
The function of the Kia Rio 3 brake calipers is to come pinch the brake discs of your Kia Rio 3 thanks to the pads they will activate. This element is an fundamental element of your vehicle’s safety. Finding out a noise from it must therefore be examined immediately and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Kia Rio 3
If you perceive a grinding or scrap metal noise coming from the brake calipers of your Kia Rio 3, it is highly conceivable that it will be linked to brake pads at the end of their existence, actually, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be replaced quickly as they will promptly damage your discs and keep doing this scrap or grinding noise on Kia Rio 3. If after checking out this point, you’re still going through a grinding noise on your Kia Rio 3, have a look at this article to find a solution.
I feel a constant noise that stops when I brake from my Kia Rio 3 brake calipers
If you are the victim of a uninterrupted noise in the brake calipers of your Kia Rio 3 that only stops when you press your brake system, it is quite conceivable that caliper wear is the cause. In fact, they can jam over time, specifically if they are not used enough. In such a case, they will tend to stay in the closed position, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Kia Rio 3
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Kia Rio 3, you will have to worry about the state of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be substituted at some point. A vibration most often notifies of veiled brake disc, you can check it by disassembling your wheels. If so, replace them or have them replaced by your auto technician.
When I brake, I feel a squealing in my brake calipers of my Kia Rio 3
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Kia Rio 3, creating a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
