It appears occasionally that your car makes noises in the brake calipers, you are pretty much never reassured by this types of noise and you automatically tend to think that you will have an accident or that the repair will cost you an astronomical amount of money. So, what if you detect noise from the brake calipers on your Hyundai Kona? It may not be anything serious and you may be able to fix it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to check before a more serious failure happens. It is with this in mind that we have made the decision to write this document and give you the chance to find out the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Hyundai Kona, and give you the causes for them in order to help you solve the trouble.
The different types of brake caliper noise on Hyundai Kona and their causes
The function of the Hyundai Kona brake calipers is to come pinch the brake discs of your Hyundai Kona thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Discovering a noise from it must therefore be looked into right away and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Hyundai Kona
If you perceive a grinding or scrap metal noise coming from the brake calipers of your Hyundai Kona, it is highly imaginable that it will be related to brake pads at the end of their life, indeed, the purpose of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each company gives an average runtime in kilometres for pads, but depending on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be changed quickly as they will quickly damage your discs and keep doing this scrap or grinding noise on Hyundai Kona. If after verifying this point, you’re still having a grinding noise on your Hyundai Kona, have a look at this article to find a solution.
I encounter a frequent noise that stops when I brake from my Hyundai Kona brake calipers
If you are the victim of a continual noise in the brake calipers of your Hyundai Kona that only stops when you press your brake system, it is quite plausible that caliper wear is the reason. Indeed, they can jam over time, specifically if they are not used enough. When this happens, they will tend to remain in the closed position, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Hyundai Kona
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Hyundai Kona, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a longer life than pads, they must be changed at some point. A vibration most often shows of veiled brake disc, you can check it by removing your wheels. If so, change them or have them replaced by your technician.
When I brake, I encounter a squealing in my brake calipers of my Hyundai Kona
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Hyundai Kona, producing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
