It occurs in some cases that your car makes noises in the brake calipers, you are certainly not reassured by this sort of noise and you instantly tend to think that you will have an incident or that the repair will cost you an substantial amount. So, what if you discover noise from the brake calipers on your Fiat Doblo 2? It most likely is not anything severe and you may be able to fix it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have decided to create this content and give you the chance to find the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Fiat Doblo 2, and give you the explanations for them in order to help you fix the trouble.
The different types of brake caliper noise on Fiat Doblo 2 and their causes
The objective of the Fiat Doblo 2 brake calipers is to come pinch the brake discs of your Fiat Doblo 2 thanks to the pads they will activate. This component is an essential element of your vehicle’s safety. Hearing a noise from it must therefore be investigated immediately and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Fiat Doblo 2
If you listen to a grinding or scrap metal noise coming from the brake calipers of your Fiat Doblo 2, it is highly imaginable that it will be caused by brake pads at the end of their life, in fact, the function of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each producer gives an average runtime in kilometres for pads, but based on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be changed quickly as they will very easily ruin your discs and keep doing this scrap or grinding noise on Fiat Doblo 2. If after verifying this point, you’re still encountering a grinding noise on your Fiat Doblo 2, have a look at this article to find a solution.
I experience a continuous noise that stops when I brake from my Fiat Doblo 2 brake calipers
If you are the victim of a continual noise in the brake calipers of your Fiat Doblo 2 that only stops when you press your brake system, it is quite plausible that caliper wear is the reason. Indeed, they can jam as time passes, specifically if they are not used enough. In such a case, they will tend to stay on in the closed position, so they will always stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Fiat Doblo 2
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Fiat Doblo 2, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be changed at some point. A vibration most often shows of veiled brake disc, you can check it by disassembling your wheels. If so, swap them or have them replaced by your auto mechanic.
When I brake, I experience a squealing in my brake calipers of my Fiat Doblo 2
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Fiat Doblo 2, producing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
