If you too have already experience a grinding noise on Renault Master, you must have asked yourself the same questions as all Renault Master owners. We are rarely reassured when a grinding noise happens on our vehicle. As we are conscious of your fears and questions, we have chosen to compose this article in order to support you in and ease your investigation for a answer to your trouble. To do this, first we will see what the sources of a grinding noise on Renault Master are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Renault Master that originates from the shock absorbers and to finish from one of your doors.grinding-noise-renault-master

I listen a grinding noise on Renault Master each time I turn the wheel

First, we will look into the grinding noises on Renault Master that appear once you turn the wheel of your vehicle. Here are the main causes for this:

  • Hydraulic system
  • If you notice grinding noises on your Renault Master each time you turn the wheels, it may be relating to the hydraulic system of your vehicle that allows you to operate the entire power steering part. In cases like this, the main point to check is the power steering fluid level, which if below the normal level could be an indicator of a leak of the unit. In this case, keep in mind to redo the level and check it regularly. If the trouble continues, go to your mechanic.

  • Bearings
  • “A grinding noise on Renault Master each time I turn the wheels of my vehicle” can also result from premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the vehicle when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can produce sounds close to a grinding if they are worn. Bear in mind to check their state.

  • Steering pump
  • Finally, a grinding noise on Renault Master each time I turn may be linked to a tired steering pump power steering pump. The mission of this organ is to run the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may surface between it and the belt. Please remember to check that it is working properly.

    If despite these different possibilities you continue to experience a grinding noise on Renault Master when turning your steering wheel, we have created a complete content page on this subject that can help you find the origin.

    I listen to a grinding noise on Renault Master each time braking

    If you listen a grinding noise from the brakes of your Renault Master, it is highly conceivable that it will be connected to brake pads at the end of their life, in fact, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead they will have to be substituted fairly quickly because they will fairly quickly damage your discs.
    If, despite crontrol, your grinding noise on Renault Master does come from your brakes but is not relating to the pads, check this content page to find out the other plausible origins of brake noises on Renault Master.

    I listen a grinding noise on Renault Master at the shock absorbers

    If you are in the scenario where you establish the grinding noise on Renault Master as coming from the damping part of your vehicle, whether you are driving over a retarder, on a bumpy road, or simply each time you change direction and the vehicle’s mass is swung from one side to the other. In this case, there are several causes that can justify this noise. In fact, you will have to check some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to check that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would result in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Renault Master

    at each compression.
    Once you have checked out all these points, you should have found the source of your problem, go to your technician to fix the faulty component. If you have not discovered the source of your trouble, we recommend highly that you look at this content page which discusses all possible origins of shock absorber noise on Renault Master.

    I listen a grinding noise on Renault Master at a door

    If that’s not enough, don’t hesitate to check out this complete content page on door sounds on Renault Master.
    It is plausible, depending on the kind of of noise you know, that the hinge of your door is at the source of these noises. If this is the case, you will have to examine it by opening your door and verifying that the grinding noise on your Renault Master comes from a hinge that is too dry. To fix this trouble, first try to grease the hinge, in most cases this is enough to solve your trouble. If that’s not enough, don’t hesitate to read this complete content page on door sounds on Renault Master.