If you too have already experienced a grinding noise on Peugeot Boxer 2, you must have asked yourself the same questions as all Peugeot Boxer 2 owners. We are rarely reassured when a grinding noise shows up on our car. As we are conscious of your concerns and questions, we have chosen to produce this content in order to support you in and ease your quest for a remedy to your issue. To do this, first we will see what the origins of a grinding noise on Peugeot Boxer 2 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Peugeot Boxer 2 that originates from the shock absorbers and to finish from one of your doors.
I acknowledge a grinding noise on Peugeot Boxer 2 when I turn the wheel
First, we will check out the grinding noises on Peugeot Boxer 2 that arise when ever you turn the wheel of your car. Here are the main reasons for this:
- Hydraulic system
- Bearings
- Steering pump
- You have an oil leak at a shock absorber, it is up to you to verify that there is no oil leaking from your shock absorbers.
- You may experience abnormal wear and tear on one of the seals. This would result in an oil leak
- Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Peugeot Boxer 2
If you hear grinding noises on your Peugeot Boxer 2 when you turn the wheels, it may be connected to the hydraulic system of your car that allows you to run the entire power steering part. In cases like this, the main point to verify is the power steering fluid level, which if below the normal level could be an indication of a leak of the unit. In this case, think about to redo the level and verify it frequently. If the issue is persistant, go to your auto technician.
“A grinding noise on Peugeot Boxer 2 when I turn the wheels of my car” can also result from premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Keep in mind to verify their condition.
Finally, a grinding noise on Peugeot Boxer 2 when I turn may be associated with a tired steering pump power steering pump. The task of this organ is to run the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may show up between it and the belt. Take into account to verify that it is working properly.
If despite these different solutions you continue to experience a grinding noise on Peugeot Boxer 2 when turning your steering wheel, we have created a complete content on this subject that can help you find the origin.
I hear a grinding noise on Peugeot Boxer 2 when braking
If you acknowledge a grinding noise from the brakes of your Peugeot Boxer 2, it is highly imaginable that it will be connected to brake pads at the end of their life, actually, the task of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Remove the wheels in question and verify the wear indicator on them. If they are dead they will have to be substituted fairly quickly because they will fairly quickly damage your discs.
If, despite verification, your grinding noise on Peugeot Boxer 2 does come from your brakes but is not connected to the pads, verify this article to find out the other conceivable sources of brake noises on Peugeot Boxer 2.
I acknowledge a grinding noise on Peugeot Boxer 2 at the shock absorbers
If you are in the situation where you establish the grinding noise on Peugeot Boxer 2 as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply when you change direction and the vehicle’s mass is swung from one side to the other. In this case, there are several reasons that can justify this noise. In fact, you will have to verify some points, here they are:
at each compression.
Once you have checked all these points, you should have found the origin of your trouble, go to your auto technician to fix the defective component. If you have not located the origin of your issue, we recommend highly that you look at this article which discusses all possible origins of shock absorber noise on Peugeot Boxer 2.
I acknowledge a grinding noise on Peugeot Boxer 2 at a door
If that’s not enough, don’t hesitate to take a look at this complete article on door sounds on Peugeot Boxer 2.
It is conceivable, depending on the kind of of noise you note, that the hinge of your door is at the source of these noises. If this is the case, you will have to verify it by opening your door and verifying that
