If you too have already hear a grinding noise on Peugeot 807, you must have wondering the same questions as all Peugeot 807 owners. We are rarely reassured when a grinding noise arises on our car. As we are conscious of your doubts and questions, we have chosen to compose this article content to be able to support you in and facilitate your search for a answer to your issue. To do this, first we will see what the origins of a grinding noise on Peugeot 807 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Peugeot 807 that originates from the shock absorbers and to finish from one of your doors.grinding-noise-peugeot-807

I experience a grinding noise on Peugeot 807 once I turn the wheel

First, we will have a look at the grinding noises on Peugeot 807 that happen when you turn the wheel of your car. Here are the main causes for this:

  • Hydraulic system
  • If you notice grinding noises on your Peugeot 807 once you turn the wheels, it may be connected to the hydraulic system of your car that allows you to run the entire power steering part. In cases like this, the main point to verify is the power steering fluid level, which if below the normal level could be an indicator of a leak of the system. In this case, please remember to redo the level and verify it regularly. If the issue continues, go to your auto technician.

  • Bearings
  • “A grinding noise on Peugeot 807 once I turn the wheels of my car” can also originate from premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Please remember to verify their condition.

  • Steering pump
  • Finally, a grinding noise on Peugeot 807 once I turn may be relating to a tired steering pump power steering pump. The objective of this organ is to run the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may surface between it and the belt. Bear in mind to verify that it is working properly.

    If despite these different possibilities you continue to hear a grinding noise on Peugeot 807 when turning your steering wheel, we have produced a complete content on this subject that can support you find the origin.

    I listen a grinding noise on Peugeot 807 once braking

    If you experience a grinding noise from the brakes of your Peugeot 807, it is highly imaginable that it will be associated with brake pads at the end of their life, in fact, the task of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but according to your driving style and route, this may vary. Take out the wheels in question and verify the wear indicator on them. If they are dead they will have to be swapped promptly because they will promptly damage your discs.
    If, despite verification, your grinding noise on Peugeot 807 does come from your brakes but is not connected to the pads, verify this article content to find out the other plausible origins of brake noises on Peugeot 807.

    I experience a grinding noise on Peugeot 807 at the shock absorbers

    If you are in the situation where you identify the grinding noise on Peugeot 807 as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply once you change direction and the vehicle’s mass is swung from one side to the other. In this instance, there are several causes that can explain this noise. Indeed, you will have to verify some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to verify that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would result in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Peugeot 807

    at each compression.
    Once you have examined all these elements, you should have found the origin of your problem, go to your mechanic to repair the faulty part. If you have not identified the origin of your issue, we recommend that you look at this article content which discusses all possible origins of shock absorber noise on Peugeot 807.

    I experience a grinding noise on Peugeot 807 at a door

    If that’s not enough, don’t hesitate to look at this full article content on door sounds on Peugeot 807.
    It is plausible, determined by the type of noise you acknowledge, that the hinge of your door is at the source of these noises. If this is the case, you will have to verify it by opening your door and examining that the grinding noise on your Peugeot 807 comes from a hinge that is too dry. To resolve this issue, first try to grease the hinge, in most cases this is enough to solve your issue. If that’s not enough, don’t hesitate to have a look at this complete article content on door sounds on Peugeot 807.