If you too have already feel a grinding noise on Peugeot 309, you must have asked yourself the same questions as all Peugeot 309 owners. We are rarely reassured when a grinding noise occurs on our car. As we are conscious of your fears and questions, we have decided to produce this content to be able to support you in and facilitate your quest for a remedy to your problem. To do this, first we will see what the origins of a grinding noise on Peugeot 309 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Peugeot 309 that comes from the shock absorbers and to finish from one of your doors.
I perceive a grinding noise on Peugeot 309 when ever I turn the wheel
First, we will look at the grinding noises on Peugeot 309 that appear when ever you turn the wheel of your car. Here are the main reasons for this:
- Hydraulic system
- Bearings
- Steering pump
- You have an oil leak at a shock absorber, it is up to you to examine that there is no oil leaking from your shock absorbers.
- You may experience abnormal wear and tear on one of the seals. This would end in an oil leak
- Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Peugeot 309
If you feel grinding noises on your Peugeot 309 when ever you turn the wheels, it may be linked to the hydraulic system of your car that allows you to operate the entire power steering part. In this instance, the main point to examine is the power steering fluid level, which if below the normal level could be a sign of a leak of the unit. In this case, please remember to redo the level and examine it frequently. If the problem persists, go to your auto mechanic.
“A grinding noise on Peugeot 309 when ever I turn the wheels of my car” can also be a consequence of premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Remember to examine their state.
Finally, a grinding noise on Peugeot 309 when ever I turn may be associated with a tired steering pump power steering pump. The objective of this organ is to run the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may arise between it and the belt. Remember to examine that it is working properly.
If despite these different solutions you continue to encounter a grinding noise on Peugeot 309 when turning your steering wheel, we have produced a complete content page on this subject that can support you discover the origin.
I listen to a grinding noise on Peugeot 309 when ever braking
If you perceive a grinding noise from the brakes of your Peugeot 309, it is highly conceivable that it will be connected to brake pads at the end of their life, indeed, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but according to your driving style and route, this may vary. Take off the wheels in question and examine the wear indicator on them. If they are dead they will have to be swapped promptly because they will promptly damage your discs.
If, despite verification, your grinding noise on Peugeot 309 does come from your brakes but is not linked to the pads, examine this content to find out the other plausible sources of brake noises on Peugeot 309.
I perceive a grinding noise on Peugeot 309 at the shock absorbers
If you are in the situation where you establish the grinding noise on Peugeot 309 as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply when ever you change direction and the vehicle’s mass is swung from one side to the other. In cases like this, there are several reasons that can justify this noise. In fact, you will have to examine some points, here they are:
at each compression.
Once you have tested all these areas, you should have found the source of your problem, go to your technician to fix the defective component. If you have not discovered the source of your problem, we recommend highly that you have a look at this content which discusses all possible origins of shock absorber noise on Peugeot 309.
I perceive a grinding noise on Peugeot 309 at a door
If that’s not enough, don’t hesitate to read this full content on door sounds on Peugeot 309.
It is plausible, based on the type of noise you acknowledge, that the hinge of your door is at the origin of these noises. If this is the case, you will have to check it by opening your door and verifying that
