If you too have already experienced a grinding noise on hyundai i30, you must have wondering the same questions as all hyundai i30 owners. We are rarely reassured when a grinding noise occurs on our car. As we are conscious of your doubts and questions, we have decided to compose this article in order to support you in and ease your search for a answer to your issue. To do this, first we will see what the sources of a grinding noise on hyundai i30 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on hyundai i30 that originates from the shock absorbers and to finish from one of your doors.grinding-noise-hyundai-i30

I perceive a grinding noise on hyundai i30 when ever I turn the wheel

First, we will take a look at the grinding noises on hyundai i30 that happen once you turn the wheel of your car. Here are the main causes for this:

  • Hydraulic system

    • If you feel grinding noises on your hyundai i30 when ever you turn the wheels, it may be related to the hydraulic system of your car that allows you to run the entire power steering part. In cases like this, the main point to examine is the power steering fluid level, which if below the normal level could be an indication of a leak of the unit. In this case, please remember to redo the level and examine it frequently. If the issue is persistant, go to your mechanic.

  • Bearings

    • “A grinding noise on hyundai i30 when ever I turn the wheels of my car” can also result from premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Take into account to examine their state.

  • Steering pump

    • Finally, a grinding noise on hyundai i30 when ever I turn may be related to a tired steering pump power steering pump. The objective of this organ is to run the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may emerge between it and the belt. Think about to examine that it is working properly.

    If despite these different solutions you continue to encounter a grinding noise on hyundai i30 when turning your steering wheel, we have produced a complete content on this subject that can help you find the origin.

    I acknowledge a grinding noise on hyundai i30 when ever braking

    If you perceive a grinding noise from the brakes of your hyundai i30, it is highly conceivable that it will be caused by brake pads at the end of their life, actually, the task of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Take off the wheels in question and examine the wear indicator on them. If they are dead they will have to be swapped quickly because they will quickly damage your discs.
    If, despite verification, your grinding noise on hyundai i30 does come from your brakes but is not related to the pads, examine this content page to find out the other plausible origins of brake noises on hyundai i30.

    I perceive a grinding noise on hyundai i30 at the shock absorbers

    If you are in the scenario where you discern the grinding noise on hyundai i30 as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply when ever you change direction and the vehicle’s mass is swung from one side to the other. In cases like this, there are several causes that can justify this noise. Indeed, you will have to examine some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to examine that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would result in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will make a grinding noise on hyundai i30

    at each compression.
    Once you have checked out all these points, you should have found the source of your problem, go to your motor mechanic to fix the defective part. If you have not identified the source of your issue, we recommend that you look at this content page which discusses all possible origins of shock absorber noise on hyundai i30.

    I perceive a grinding noise on hyundai i30 at a door

    If that’s not enough, don’t hesitate to take a look at this full content page on door sounds on hyundai i30.
    It is plausible, according to the type of noise you acknowledge, that the hinge of your door is at the origin of these noises. If this is the case, you will have to check it by opening your door and examining that the grinding noise on your hyundai i30 comes from a hinge that is too dry. To resolve this issue, first try to grease the hinge, in most cases this is enough to solve your issue. If that’s not enough, don’t hesitate to have a look at this complete content page on door sounds on hyundai i30.