If you too have already discover a grinding noise on Fiat Doblo, you must have wondering the same questions as all Fiat Doblo owners. We are rarely reassured when a grinding noise occurs on our car. As we are conscious of your uncertainties and questions, we have made a decision to write this article content in order to support you in and ease your investigation for a solution to your problem. To do this, first we will see what the sources of a grinding noise on Fiat Doblo are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Fiat Doblo that originates from the shock absorbers and to finish from one of your doors.
I acknowledge a grinding noise on Fiat Doblo every time I turn the wheel
First, we will have a look at the grinding noises on Fiat Doblo that occur once you turn the wheel of your car. Here are the main explanations for this:
- Hydraulic system
- Bearings
- Steering pump
- You have an oil leak at a shock absorber, it is up to you to verify that there is no oil leaking from your shock absorbers.
- You may encounter abnormal wear and tear on one of the seals. This would trigger an oil leak
- Finally you can have one of your shock absorber cylinders deformed, which will generate a grinding noise on Fiat Doblo
If you notice grinding noises on your Fiat Doblo every time you turn the wheels, it may be linked to the hydraulic system of your car that allows you to run the entire power steering part. In this case, the main point to verify is the power steering fluid level, which if below the normal level could be an indicator of a leak of the system. In this case, bear in mind to redo the level and verify it frequently. If the problem lasts, go to your auto technician.
“A grinding noise on Fiat Doblo every time I turn the wheels of my car” can also originate from premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can produce sounds close to a grinding if they are worn. Take into account to verify their condition.
Finally, a grinding noise on Fiat Doblo every time I turn may be relating to a tired steering pump power steering pump. The objective of this organ is to operate the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may occur between it and the belt. Remember to verify that it is working properly.
If despite these different solutions you continue to encounter a grinding noise on Fiat Doblo when turning your steering wheel, we have made a complete article on this subject that can support you locate the origin.
I hear a grinding noise on Fiat Doblo every time braking
If you acknowledge a grinding noise from the brakes of your Fiat Doblo, it is highly conceivable that it will be associated with brake pads at the end of their life, in fact, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Take off the wheels in question and verify the wear indicator on them. If they are dead they will have to be substituted promptly because they will promptly damage your discs.
If, despite verification, your grinding noise on Fiat Doblo does come from your brakes but is not linked to the pads, verify this article to find out the other plausible sources of brake noises on Fiat Doblo.
I acknowledge a grinding noise on Fiat Doblo at the shock absorbers
If you are in the scenario where you discern the grinding noise on Fiat Doblo as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply every time you change direction and the vehicle’s mass is swung from one side to the other. In cases like this, there are several explanations that can explain this noise. Indeed, you will have to verify some points, here they are:
at each compression.
Once you have examined all these points, you should have found the origin of your trouble, go to your auto mechanic to fix the faulty part. If you have not located the origin of your problem, we recommend that you look at this article which discusses all possible origins of shock absorber noise on Fiat Doblo.
I acknowledge a grinding noise on Fiat Doblo at a door
If that’s not enough, don’t hesitate to take a look at this full article on door sounds on Fiat Doblo.
It is plausible, according to the type of noise you know, that the hinge of your door is at the source of these noises. If this is the case, you will have to examine it by opening your door and examining that
