If you too have already notice a grinding noise on Bmw Serie 7, you must have asked yourself the same questions as all Bmw Serie 7 owners. We are rarely reassured when a grinding noise occurs on our vehicle. As we are conscious of your doubts and questions, we have made a decision to create this content page in order to support you in and facilitate your quest for a solution to your problem. To do this, first we will see what the origins of a grinding noise on Bmw Serie 7 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Bmw Serie 7 that comes from the shock absorbers and to finish from one of your doors.grinding-noise-bmw-serie-7

I listen to a grinding noise on Bmw Serie 7 every time I turn the wheel

First, we will look at the grinding noises on Bmw Serie 7 that take place once you turn the wheel of your vehicle. Here are the main explanations for this:

  • Hydraulic system
  • If you are subject to grinding noises on your Bmw Serie 7 every time you turn the wheels, it may be relating to the hydraulic system of your vehicle that allows you to run the entire power steering part. In such a case, the main point to verify is the power steering fluid level, which if below the normal level could be an indication of a leak of the device. In this case, keep in mind to redo the level and verify it frequently. If the problem is persistant, go to your technician.

  • Bearings
  • “A grinding noise on Bmw Serie 7 every time I turn the wheels of my vehicle” can also be a consequence of premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the vehicle when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can produce sounds close to a grinding if they are worn. Think about to verify their state.

  • Steering pump
  • Finally, a grinding noise on Bmw Serie 7 every time I turn may be linked to a tired steering pump power steering pump. The task of this organ is to operate the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may emerge between it and the belt. Remember to verify that it is working properly.

    If despite these different possibilities you continue to experience a grinding noise on Bmw Serie 7 when turning your steering wheel, we have produced a complete article on this subject that can support you locate the origin.

    I perceive a grinding noise on Bmw Serie 7 every time braking

    If you listen to a grinding noise from the brakes of your Bmw Serie 7, it is highly conceivable that it will be caused by brake pads at the end of their life, actually, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but depending on your driving style and route, this may vary. Remove the wheels in question and verify the wear indicator on them. If they are dead they will have to be changed promptly because they will promptly damage your discs.
    If, despite crontrol, your grinding noise on Bmw Serie 7 does come from your brakes but is not relating to the pads, verify this content to find out the other conceivable origins of brake noises on Bmw Serie 7.

    I listen to a grinding noise on Bmw Serie 7 at the shock absorbers

    If you are in the situation where you identify the grinding noise on Bmw Serie 7 as coming from the damping part of your vehicle, whether you are driving over a retarder, on a bumpy road, or simply every time you change direction and the vehicle’s mass is swung from one side to the other. In such a case, there are several explanations that can justify this noise. In fact, you will have to verify some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to verify that there is no oil leaking from your shock absorbers.
    • You may experience abnormal wear and tear on one of the seals. This would trigger an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Bmw Serie 7

    at each compression.
    Once you have checked all these elements, you should have found the source of your issue, go to your motor mechanic to repair the faulty part. If you have not discovered the source of your problem, we suggest that you take a look at this content which discusses all possible origins of shock absorber noise on Bmw Serie 7.

    I listen to a grinding noise on Bmw Serie 7 at a door

    If that’s not enough, don’t hesitate to read this complete content on door sounds on Bmw Serie 7.
    It is conceivable, depending on the type of noise you acknowledge, that the hinge of your door is at the source of these noises. If this is the case, you will have to examine it by opening your door and checking that the grinding noise on your Bmw Serie 7 comes from a hinge that is too dry. To resolve this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to take a look at this complete content on door sounds on Bmw Serie 7.