If you too have already hear a grinding noise on Hyundai Kona, you must have wondering the same questions as all Hyundai Kona owners. We are rarely reassured when a grinding noise comes out on our automobile. As we are conscious of your doubts and questions, we have chosen to compose this content page to be able to assist you in and facilitate your quest for a remedy to your trouble. To do this, first we will see what the sources of a grinding noise on Hyundai Kona are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Hyundai Kona that originates from the shock absorbers and to finish from one of your doors.
I notice a grinding noise on Hyundai Kona every time I turn the wheel
First, we will look into the grinding noises on Hyundai Kona that occur when ever you turn the wheel of your automobile. Here are the main causes for this:
- Hydraulic system
- Bearings
- Steering pump
- You have an oil leak at a shock absorber, it is up to you to examine that there is no oil leaking from your shock absorbers.
- You may encounter abnormal wear and tear on one of the seals. This would result in an oil leak
- Finally you can have one of your shock absorber cylinders deformed, which will make a grinding noise on Hyundai Kona
If you notice grinding noises on your Hyundai Kona every time you turn the wheels, it may be connected to the hydraulic system of your automobile that allows you to operate the entire power steering part. In this instance, the main point to examine is the power steering fluid level, which if below the normal level could be an indicator of a leak of the unit. In this case, please remember to redo the level and examine it frequently. If the trouble continues, go to your technician.
“A grinding noise on Hyundai Kona every time I turn the wheels of my automobile” can also be a consequence of premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the automobile when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can generate sounds close to a grinding if they are worn. Remember to examine their condition.
Finally, a grinding noise on Hyundai Kona every time I turn may be associated with a tired steering pump power steering pump. The mission of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may surface between it and the belt. Consider to examine that it is working properly.
If despite these different solutions you continue to experience a grinding noise on Hyundai Kona when turning your steering wheel, we have created a complete content page on this subject that can support you find the origin.
I listen to a grinding noise on Hyundai Kona every time braking
If you notice a grinding noise from the brakes of your Hyundai Kona, it is highly imaginable that it will be associated with brake pads at the end of their life, indeed, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Take off the wheels in question and examine the wear indicator on them. If they are dead they will have to be swapped promptly because they will promptly damage your discs.
If, despite crontrol, your grinding noise on Hyundai Kona does come from your brakes but is not connected to the pads, examine this content page to find out the other conceivable sources of brake noises on Hyundai Kona.
I notice a grinding noise on Hyundai Kona at the shock absorbers
If you are in the scenario where you find the grinding noise on Hyundai Kona as coming from the damping part of your automobile, whether you are driving over a retarder, on a bumpy road, or simply every time you change direction and the vehicle’s mass is swung from one side to the other. In cases like this, there are several causes that can explain this noise. Indeed, you will have to examine some points, here they are:
at each compression.
Once you have tested all these points, you should have found the source of your problem, go to your auto technician to repair the faulty part. If you have not discovered the source of your trouble, we recommend that you take a look at this content page which discusses all possible origins of shock absorber noise on Hyundai Kona.
I notice a grinding noise on Hyundai Kona at a door
If that’s not enough, don’t hesitate to look at this complete content page on door sounds on Hyundai Kona.
It is conceivable, determined by the type of noise you note, that the hinge of your door is at the origin of these noises. If this is the case, you will have to check it by opening your door and verifying that
