When you find out about unusual noises on your Chevrolet Volt you tend to worry. Especially when you encounter a noise coming from the release bearing of your Chevrolet Volt. It is instantly assimilated to an engine issue and can therefore be serious. As we know that you do not take these problems lightly, we have chosen to make this content page to help you find the triggers and free yourself from this issues as quickly as possible. To do this, we will first concentrate on the function and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Chevrolet Volt and their origins.
What is the purpose and operation of the release bearing on Chevrolet Volt?
Function of the release bearing on Chevrolet Volt
The release bearing of your Chevrolet Volt has a essential function in the operation of your entire gearbox system. In fact, its mission is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is controlled by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Chevrolet Volt.
Action of release bearing Chevrolet Volt
Let’s now look at the technical side, the release bearing is composed of two units, a first fixed part that slides only when the stop is pulled, or pushed (depending on its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two different types of release bearing Chevrolet Volt :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two types of release bearing . This one, unlike the hydraulic type, is operated by a mechanical pulling system that will release the clutch disc. In this situation, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more technical, is the form most used in modern vehicles. It is however more complex than the pulled release bearing. In fact, it will be composed of a hydraulic tube that will receive the pressure right from the clutch pedal.
More conventional clutch stop
Release bearing noises Chevrolet Volt and their origins
I encounter a release bearing noise on Chevrolet Volt once I drive and it stops when I depress my clutch pedal
If you encounter a noise from your gearbox, release bearing or clutch itself when your engine is running, but it ends when you press your clutch pedal, this noise often sounds like a bell noise, it is highly conceivable that your release bearing is the cause. Make sure that this noise stops when you disengage, in which situation it is time to change the release bearing of your Chevrolet Volt.
I encounter a release bearing noise when my pedal is up and I encounter jolts in my foot
If you encounter too much or too little resistance when you press your clutch pedal, and it is linked with jolts that you can encounter in your clutch pedal, then the stop/fork release/blades grouping is deteriorated. In fact, this noise often comes from the broken fork that no longer allows the device to run normally.
I encounter a grinding noise coming from the release bearing of my Chevrolet Volt when I try to shift gears and they do not shift
This issues shows up most often on models equipped with hydraulic release bearing. It is often linked to a clutch pedal that has little or no resistance. If you are in this situation and you feel a grinding or cracking noise coming from the release bearing of your Chevrolet Volt, then you probably have a leak coming from your release bearing. It must therefore be swapped fairly quickly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Chevrolet Volt and it’s not from your release bearing, check this article to have more informations.
