When you identify unusual noises on your Acura TLX you tend to stress. Especially when you feel a noise coming from the release bearing of your Acura TLX. It is instantly assimilated to an engine trouble and can therefore be serious. As we know that you do not take these concerns lightly, we have decided to write this content to help you locate the causes and free yourself from this matter as quickly as possible. To do this, we will first focus on the function and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Acura TLX and their sources.
What is the function and operation of the release bearing on Acura TLX?
Purpose of the release bearing on Acura TLX
The release bearing of your Acura TLX has a crucial function in the operation of your entire gearbox system. Indeed, its task is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is controlled by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Acura TLX.
Function of release bearing Acura TLX
Let’s now look at the technical side, the release bearing is composed of two units, a first fixed part that slides only when the stop is pulled, or pushed (determined by its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two different variants of release bearing Acura TLX :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two variants of release bearing . This one, in contrast to the hydraulic style, is operated by a mechanical pulling system that will release the clutch disc. In this situation, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more complex, is the version most used in contemporary vehicles. It is however more elaborate than the pulled release bearing. Indeed, it will be composed of a hydraulic tube that will receive the pressure directly from the clutch pedal.
More conventional clutch stop
Release bearing noises Acura TLX and their sources
I feel a release bearing noise on Acura TLX once I drive and it stops when I release my clutch pedal
If you feel a noise from your gearbox, release bearing or clutch itself when your engine is running, but it stops when you press your clutch pedal, this noise often sounds like a bell noise, it is highly possible that your release bearing is the reason. Make sure that this noise stops when you disengage, in which situation it is time to swap the release bearing of your Acura TLX.
I feel a release bearing noise when my pedal is up and I feel jolts in my foot
If you feel too much or too little resistance when you press your clutch pedal, and it is linked with jolts that you can feel in your clutch pedal, then the stop/fork release/blades grouping is damaged. Indeed, this noise often comes from the broken fork that no longer allows the system to operate normally.
I feel a grinding noise coming from the release bearing of my Acura TLX when I try to shift gears and they do not shift
This matter shows up most often on models equipped with hydraulic release bearing. It is often connected to a clutch pedal that has little or no resistance. If you are in this circumstance and you feel a grinding or cracking noise coming from the release bearing of your Acura TLX, then you probably have a leak coming from your release bearing. It must therefore be swapped promptly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Acura TLX and it’s not from your release bearing, check this article to have more informations.
