When you notice unusual noises on your Honda Civic you commonly tend to be troubled. Specifically when you feel a noise coming from the release bearing of your Honda Civic. It is immediately assimilated to an engine trouble and can therefore be serious. As we know that you do not take these problems lightly, we have decided to write this content to help you locate the causes and free yourself from this issues as quickly as possible. To do this, we will first concentrate on the purpose and operation of the release bearing of your clutch, and in a second step we will look in detail at the different release bearing noises on Honda Civic and their origins.
What is the function and operation of the release bearing on Honda Civic?
Task of the release bearing on Honda Civic
The release bearing of your Honda Civic has a major purpose in the operation of your entire gearbox system. In fact, its task is to liberate the gearbox from the rotation of the engine block via its action. This will allow you to shift gears. It is controlled by the clutch pedal and then by the release fork, which, when it is activated, will press on the clutch and release the gearbox from engine rotation for you allow you to shift gears on your Honda Civic.
Function of release bearing Honda Civic
Let’s now look at the technical side, the release bearing is composed of two units, a first fixed part that slides only when the stop is pulled, or pushed (according to its type) and finally a rotating part that is composed of a bearing that will allow it to stay in contact with the mechanism and follow its rotation.
There are two distinct variants of release bearing Honda Civic :
- Pulled release bearing
- Hydraulic release bearing
It is the most unconventional of the two variants of release bearing . This one, compared with the hydraulic version, is operated by a mechanical pulling system that will release the clutch disc. In this situation, the release bearing must be mechanically fixed to the mechanism.
The hydraulic release bearing, although more technical, is the kind most used in contemporary automobiles. It is however more complex than the pulled release bearing. In fact, it will be composed of a hydraulic tube that will receive the pressure immediately from the clutch pedal.
More conventional clutch stop
Release bearing noises Honda Civic and their origins
I feel a release bearing noise on Honda Civic every time I drive and it stops when I release my clutch pedal
If you feel a noise from your gearbox, release bearing or clutch itself when your engine is running, but it ends when you press your clutch pedal, this noise often sounds like a bell noise, it is highly conceivable that your release bearing is the reason. Make sure that this noise stops when you disengage, in which circumstance it is time to replace the release bearing of your Honda Civic.
I feel a release bearing noise when my pedal is up and I feel jolts in my foot
If you feel too much or too little resistance when you press your clutch pedal, and it is connected with jolts that you can feel in your clutch pedal, then the stop/fork release/blades grouping is damaged. In fact, this noise often comes from the broken fork that no longer allows the device to run normally.
I feel a grinding noise coming from the release bearing of my Honda Civic when I try to shift gears and they do not shift
This issues arises most often on models equipped with hydraulic release bearing. It is often linked to a clutch pedal that has little or no resistance. If you are in this situation and you feel a grinding or cracking noise coming from the release bearing of your Honda Civic, then you probably have a leak coming from your release bearing. It must therefore be replaced almost instantly or risk damaging your gearbox in addition to the clutch. If you have a noise coming from the gearbox of your Honda Civic and it’s not from your release bearing, check this article to have more informations.
