You listen a starter motor noise on your Chevrolet Bolt each time you start your automobile. We agree that this is not agreeable and that you have questions. Finding out such a sound is not always a good indication, but it may also be nothing serious. To assist you resolve this trouble, our team has chosen to produce this article to help you in this research. First, we will describe how the starter motor functions on your Chevrolet Bolt, and then what starter motor noises you can encounter on your Chevrolet Bolt.
Functioning and various information
Function of a starter motor on Chevrolet Bolt
The starter motor is an electric motor whose only task is to start the engine of your vehicle. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Chevrolet Bolt is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Chevrolet Bolt
- Do not try to start your engine for too long
- Do not use a starter motor on Chevrolet Bolt with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is tired, you always want to start your vehicle, the energy it is capable of holding may not be enough to give the power needed by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not resolve the origin of your failure to start repeatedly, your starter may be the future element you will have to change.
I listen noises from the starter motor of my Chevrolet Bolt, what are the causes?
I encounter a loud noise from the starter of my Chevrolet Bolt
If you listen a starter motor noise on Chevrolet Bolt and you have the feeling that it is close to a loud noise, it is plausible that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be ideal, in which situation the gears will be worn down after some time and will not slip and will no longer properly engage the engine when starting. Verify the condition of the drive pinion, if it is the element responsible of the starter motor noise on your Chevrolet Bolt replace it.
If it is a noise in the front of your vehicle but it seems to you after reviewing not to come from your starter, consult this article about front end noise on Chevrolet Bolt which may give you other leads to fix your noise trouble.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Chevrolet Bolt
If you listen a clicking noise at the starter motor of your Chevrolet Bolt, there are two possible failures connected to this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You could have a trouble with unplugged cable verify your electrical installation. If after checking out this clicking noise on Chevrolet Bolt doesn’t come from your starter motor, check this article for more informations.
