You acknowledge a starter motor noise on your Chevrolet Trax each time you start your automobile. We can understand that this is not pleasant and that you have inquiries. Discovering such a noise is not always a good signal, but it may also be nothing serious. To help you remedy this issue, our team has decided to produce this article to help you in this research. First, we will explain how the starter motor functions on your Chevrolet Trax, and then what starter motor noises you can discover on your Chevrolet Trax.
Functioning and various information
Function of a starter motor on Chevrolet Trax
The starter motor is an electric motor whose sole job is to start the engine motor of your vehicle. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Chevrolet Trax is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Chevrolet Trax
- Do not run your starter too long
- Do not use a starter motor on Chevrolet Trax with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is tired, you always want to start your vehicle, the energy it is capable of holding may not be enough to provide the power expected by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not solve the trigger of your failure to start repeatedly, your starter may be the future element you will have to replace.
I acknowledge noises from the starter motor of my Chevrolet Trax, what are the causes?
I feel a loud noise from the starter of my Chevrolet Trax
If you experience a starter motor noise on Chevrolet Trax and you have the feeling that it is approaching a loud noise, it is plausible that it is the starter motor gears that are at the origin of it. In fact, often when the part has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be appropriate, in which circumstance the gears will be worn down over time and will not slip and will no longer properly engage the engine when starting. Check the state of the drive pinion, if it is the element responsible of the starter motor noise on your Chevrolet Trax replace it.
If it is a noise in the front of your vehicle but it seems to you after reviewing not to come from your starter, browse this article about front end noise on Chevrolet Trax which may provide you other leads to resolve your noise issue.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Chevrolet Trax
If you acknowledge a clicking noise at the starter motor of your Chevrolet Trax, there are two possible failures linked to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You could have a issue with unplugged cable check your electrical installation. If after checking this clicking noise on Chevrolet Trax doesn’t come from your starter motor, check this article for more informations.
