You experience a starter motor noise on your Acura RDX when you start your automobile. We can understand that this is not enjoyable and that you have inquiries. Hearing such a noise is not always a good sign, but it may also be nothing significant. To assist you resolve this issue, our team has chosen to create this content to help you in this research. First, we will detail how the starter motor functions on your Acura RDX, and then what starter motor noises you can know on your Acura RDX.
Functioning and various information
Function of a starter motor on Acura RDX
The starter motor is an electric motor whose only task is to start the engine unit of your automobile. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Acura RDX is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Acura RDX
- Do not run your starter too long
- Do not use a starter motor on Acura RDX with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not try to start for more than a few seconds or you will burn it.
Although when you have a battery that is exhausted, you always want to start your automobile, the energy it is capable of holding may not be good enough to give the power expected by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not deal with the cause of your failure to start repeatedly, your starter may be the future component you will have to change.
I experience noises from the starter motor of my Acura RDX, what are the causes?
I experience a loud noise from the starter of my Acura RDX
If you experience a starter motor noise on Acura RDX and you have the feeling that it is approaching a loud noise, it is plausible that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be optimal, in which case the gears will be worn down over time and will not slip and will no longer properly activate the engine when starting. Examine the state of the drive pinion, if it is the component resposible of the starter motor noise on your Acura RDX replace it.
If it is a noise in the front of your automobile but it seems to you after examining not to come from your starter, check this content about front end noise on Acura RDX which may offer you other leads to solve your noise issue.
I experience a clicking noise of the key running in my neiman but no noise at the starter motor of my Acura RDX
If you experience a clicking noise at the starter motor of your Acura RDX, there are two possible failures linked to this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You may have a issue with unplugged cable verify your electrical installation. If after checking this clicking noise on Acura RDX doesn’t come from your starter motor, check this article for more informations.