You listen a starter motor noise on your Jeep Liberty every time you start your vehicle. We can understand that this is not enjoyable and that you have inquiries. Listening such a sound is not always a good sign, but it may also be nothing major. To help you fix this problem, our team has chosen to write this content page to assist you in this research. First, we will explain how the starter motor works on your Jeep Liberty, and then what starter motor noises you can notice on your Jeep Liberty.
Functioning and various information
Function of a starter motor on Jeep Liberty
The starter motor is an electric motor whose single task is to start the engine unit of your car. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Jeep Liberty is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Jeep Liberty
- Do not run your starter too long
- Do not use a starter motor on Jeep Liberty with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be sufficient to provide the power needed by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not fix the trigger of your failure to start repeatedly, your starter may be the future element you will have to replace.
I listen noises from the starter motor of my Jeep Liberty, what are the triggers?
I feel a loud noise from the starter of my Jeep Liberty
If you perceive a starter motor noise on Jeep Liberty and you have the feeling that it is approaching a loud noise, it is possible that it is the starter motor gears that are at the source of it. Indeed, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be optimal, in which circumstance the gears will be worn down as time passes and will not slip and will no longer properly activate the engine when starting. Examine the state of the drive pinion, if it is the component resposible of the starter motor noise on your Jeep Liberty swap it.
If it is a noise in the front of your car but it seems to you after examining not to come from your starter, consult this content page about front end noise on Jeep Liberty which may provide you other leads to remedy your noise problem.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Jeep Liberty
If you listen a clicking noise at the starter motor of your Jeep Liberty, there are two possible failures associated with this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a problem with unplugged cable examine your electrical installation. If after tracking this clicking noise on Jeep Liberty doesn’t come from your starter motor, check this article for more informations.
