You acknowledge a starter motor noise on your Dodge Charger each time you start your car. We agree that this is not agreeable and that you have questions. Hearing such a noise is not always a good indication, but it may also be nothing significant. To support you resolve this problem, our team has decided to prepare this content to help you in this research. First, we will describe how the starter motor works on your Dodge Charger, and then what starter motor noises you can know on your Dodge Charger.
Functioning and various information
Function of a starter motor on Dodge Charger
The starter motor is an electric motor whose single role is to start the engine of your car. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Dodge Charger is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Dodge Charger
- Do not run your starter too long
- Do not use a starter motor on Dodge Charger with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is empty, you always want to start your car, the energy it is capable of holding may not be sufficient to give the power demanded by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not treat the reason of your failure to start repeatedly, your starter may be the future part you will have to replace.
I acknowledge noises from the starter motor of my Dodge Charger, what are the reasons?
I feel a loud noise from the starter of my Dodge Charger
If you hear a starter motor noise on Dodge Charger and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the origin of it. Indeed, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be perfect, in which case the gears will be worn down after some time and will not slip and will no longer properly activate the engine when starting. Verify the condition of the drive pinion, if it is the component resposible of the starter motor noise on your Dodge Charger swap it.
If it is a noise in the front of your car but it seems to you after reviewing not to come from your starter, read this content about front end noise on Dodge Charger which may provide you other leads to resolve your noise problem.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Dodge Charger
If you acknowledge a clicking noise at the starter motor of your Dodge Charger, there are two possible failures associated with this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You could have a problem with unplugged cable examine your electrical installation. If after examining this clicking noise on Dodge Charger doesn’t come from your starter motor, check this article for more informations.
