You perceive a starter motor noise on your Toyota Tacoma when you start your automobile. We can understand that this is not enjoyable and that you have questions. Experiencing such a sound is not always a good signal, but it may also be nothing serious. To support you fix this issue, our team has decided to write this article content to assist you in this research. First, we will explain how the starter motor functions on your Toyota Tacoma, and then what starter motor noises you can know on your Toyota Tacoma.
Functioning and various information
Function of a starter motor on Toyota Tacoma
The starter motor is an electric motor whose only function is to start the engine unit of your car. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Toyota Tacoma is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Toyota Tacoma
- Do not try to start your engine for too long
- Do not use a starter motor on Toyota Tacoma with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not try to start for more than a few seconds or you will burn it.
Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be good enough to provide the power required by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not solve the origin of your failure to start repeatedly, your starter may be the future element you will have to swap.
I perceive noises from the starter motor of my Toyota Tacoma, what are the origins?
I feel a loud noise from the starter of my Toyota Tacoma
If you hear a starter motor noise on Toyota Tacoma and you have the feeling that it is approaching a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be ideal, in which case the gears will be worn down with time and will not slip and will no longer properly activate the engine when starting. Check the condition of the drive pinion, if it is responsible of the starter motor noise on your Toyota Tacoma replace it.
If it is a noise in the front of your car but it seems to you after examining not to come from your starter, browse this article content about front end noise on Toyota Tacoma which may give you other leads to resolve your noise issue.
I perceive a clicking noise of the key running in my neiman but no noise at the starter motor of my Toyota Tacoma
If you perceive a clicking noise at the starter motor of your Toyota Tacoma, there are two possible failures relating to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a issue with unplugged cable check your electrical installation. If after tracking this clicking noise on Toyota Tacoma doesn’t come from your starter motor, check this article for more informations.
