You hear a starter motor noise on your Mazda 3 once you start your car. We can understand that this is not enjoyable and that you have inquiries. Hearing such a sound is not always a good sign, but it may also be nothing serious. To help you fix this trouble, our team has decided to create this content to support you in this research. First, we will describe how the starter motor functions on your Mazda 3, and then what starter motor noises you can experience on your Mazda 3.
Functioning and various information
Function of a starter motor on Mazda 3
The starter motor is an electric motor whose only job is to start the engine of your automobile. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Mazda 3 is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Mazda 3
- Do not run your starter too long
- Do not use a starter motor on Mazda 3 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is tired, you always want to start your automobile, the energy it is capable of holding may not be sufficient to furnish the power required by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not resolve the trigger of your failure to start repeatedly, your starter may be the future part you will have to change.
I hear noises from the starter motor of my Mazda 3, what are the reasons?
I experience a loud noise from the starter of my Mazda 3
If you listen a starter motor noise on Mazda 3 and you have the feeling that it is close to a loud noise, it is plausible that it is the starter motor gears that are at the source of it. In fact, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be perfect, in which circumstance the gears will be worn down as time passes and will not slip and will no longer properly activate the engine when starting. Verify the condition of the drive pinion, if it is responsible of the starter motor noise on your Mazda 3 replace it.
If it is a noise in the front of your automobile but it seems to you after examining not to come from your starter, browse this content about front end noise on Mazda 3 which may give you other leads to fix your noise trouble.
I hear a clicking noise of the key running in my neiman but no noise at the starter motor of my Mazda 3
If you hear a clicking noise at the starter motor of your Mazda 3, there are two possible failures relating to this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You could have a trouble with unplugged cable verify your electrical installation. If after examining this clicking noise on Mazda 3 doesn’t come from your starter motor, check this article for more informations.
