You listen a starter motor noise on your Toyota Rav 4 once you start your vehicle. We can understand that this is not agreeable and that you have inquiries. Finding out such a noise is not always a good sign, but it may also be nothing severe. To assist you solve this problem, our team has chosen to produce this content to help you in this research. First, we will explain how the starter motor functions on your Toyota Rav 4, and then what starter motor noises you can experience on your Toyota Rav 4.
Functioning and various information
Function of a starter motor on Toyota Rav 4
The starter motor is an electric motor whose single role is to start the engine motor of your car. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Toyota Rav 4 is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Toyota Rav 4
- Do not run your starter too long
- Do not use a starter motor on Toyota Rav 4 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be sufficient to give the power required by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not treat the origin of your failure to start repeatedly, your starter may be the future element you will have to swap.
I listen noises from the starter motor of my Toyota Rav 4, what are the causes?
I encounter a loud noise from the starter of my Toyota Rav 4
If you listen a starter motor noise on Toyota Rav 4 and you have the feeling that it is approaching a loud noise, it is possible that it is the starter motor gears that are at the origin of it. In fact, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be optimal, in which circumstance the gears will be worn down with time and will not slip and will no longer properly activate the engine when starting. Verify the condition of the drive pinion, if it is the part responsible of the starter motor noise on your Toyota Rav 4 replace it.
If it is a noise in the front of your car but it seems to you after reviewing not to come from your starter, check this content about front end noise on Toyota Rav 4 which may offer you other leads to remedy your noise problem.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Toyota Rav 4
If you listen a clicking noise at the starter motor of your Toyota Rav 4, there are two possible failures linked to this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a problem with unplugged cable check your electrical installation. If after checking this clicking noise on Toyota Rav 4 doesn’t come from your starter motor, check this article for more informations.
