Sometimes your automobile can produce noises in the front right, you are very certainly not reassured by this kind of noise and you instantly begin to presume that you will loose a wheel or that the fix will cost you an huge sum. So, what if you identify a noise coming from the front right of your Nissan Cube? It may not be much and you can repair the problem yourself, but if in doubt it is better to examine before a larger troubles appears. It is with this in mind that we have chosen to make this content and allow you to discover the problem and find a treatment. We will, through several steps review all the components that can create noises at the front right of your Nissan Cube. 
What are the parts that can provoke front right noise Nissan Cube?
Most of our article will concentrate on finding the component that gives your Nissan Cube front wheel noise. The following is a list of the parts that are most likely to be producing it and how to confirm it.
Grinding noise front right wheel Nissan Cube : the shock absorber cup
One of the most common reason of symptoms on your Nissan Cube front right wheel noise is advanced wear and tear on your suspension device. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that works as a buffer and shock absorber for the upper part of the suspension no longer fulfils its purpose and during small jolts that compress the suspensions. To examine if this is the problem that concerns you, take a dented, slow-speed road and listen to the noise coming from your front right as you pass over holes. If these are the cups, consider replacing them promptly as this may damage other parts and require more costly repairs.
Noise while turning front right Nissan Cube : stabilizer bar
If you find out a noise when turning on your front right wheel Nissan Cube at the level of the front right when you are turning flat or going up on sidewalks for example, it is most likely connected to one of the elements of your stabilizer bar that is faulty. To confirm the source of the problem, you may find a lack of stability in the direction of the car (it pulls to the right or it pulls to the right). Also, you can put yourself on the right side of your front wheels and try to shake your wheel strongly, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Front right noise when turning Nissan Cube : direction triangles
Finally, you may have a noise in the front right wheel on your Nissan Cube, when you are accelerating, brake or at any other random moment. It is likely that the cause of this problem comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also examine the condition of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your auto technician.
Loud knocking or grinding noise front right Nissan Cube : bearings
One of the other likely causes of symptoms of the front right grinding or knocking noise on your Nissan Cube, may be that one of your bearging is tired, it will start to make a thumping noise that raises when it is under stress (turns faster and faster). So be sure you examine by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case change it or them promptly. If, on the other hand, this noise only shows up with an engaged speed, check out our article on loud noises on Nissan Cube, you will probably find a response to your problem.
Front right wheel noise squeaking Nissan Cube : cardan shaft
One of the most common causes when noise shows up on the front right of your Nissan Cube when you turn with your car is linked to the direction of your car. In fact, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Nissan Cube, do not hesitate to consult this article to find the solution to your problem.
