Occasionally your car can produce sounds in the front right, you are very almost never reassured by this kind of noise and you right away begin to think that you will loose a wheel or that the repair will cost you an huge sum. Thus, what if you identify a noise coming from the front right of your Honda Fit? It may not be much and you can fix the issue yourself, but if in doubt it is better to examine before a larger failure takes place. It is with this in mind that we have decided to compose this content and allow you to locate the issue and find a solution. We will, through different steps review all the components that can create noises at the front right of your Honda Fit. 
What are the parts that can cause front right noise Honda Fit?
Most of our article will concentrate on finding the component that gives your Honda Fit front wheel noise. The following is a list of the components that are most likely to be creating it and how to verify it.
Grinding noise front right wheel Honda Fit : the shock absorber cup
One of the most likely causes of symptoms on your Honda Fit front right wheel noise is advanced wear and tear on your shock device. Indeed, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its job and during small jolts that compress the suspensions. To examine if this is the issue that worries you, take a dented, slow-speed road and focus on the noise coming from your front right as you pass over holes. If these are the cups, consider replacing them as soon as possible as this may damage other components and require more costly repairs.
Noise while turning front right Honda Fit : stabilizer bar
If you detect a noise when turning on your front right wheel Honda Fit at the level of the front right when you are turning flat or climbing on sidewalks for example, it is most likely related to one of the elements of your stabilizer bar that is faulty. To verify the source of the issue, you may feel a lack of balance in the direction of the car (it pulls to the right or it pulls to the right). Also, you can put yourself on the right side of your front wheels and try to shake your wheel vigorously, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are out of date. In this case, go to your garage.
Front right noise when turning Honda Fit : direction triangles
Finally, you may have a noise in the front right wheel on your Honda Fit, when you are accelerating, brake or at any other random moment. It is likely that the cause of this issue comes from the direction triangle or the direction hinges. Indeed, a damaged steering triangle will be testable during the acceleration phases when it will move away and the car will pull on the outside of the weak triangle (right triangle pulls to the right) and when braking towards the inside of the same side (right triangle pulls to the right). You can also examine the condition of the swivel bellows visually, which may disturb the action of changing direction. If you are in one of these cases go to your auto technician.
Loud knocking or grinding noise front right Honda Fit : bearings
One of the other probable causes of symptoms of the front right grinding or knocking noise on your Honda Fit, may be that one of your bearging is tired, it will start to make a thumping noise that intensifies when it is under stress (turns faster and faster). So make sure you examine by taking speed (neutral and window open to hear only the noise of the wheels) that the noise is well located here, if this is the case replace it or them as soon as possible. If, on the other hand, this noise only appears with an engaged speed, check out our article on loud noises on Honda Fit, you will probably find a solution to your issue.
Front right wheel noise squeaking Honda Fit : cardan shaft
One of the most common causes when noise appears on the front right of your Honda Fit when you turn with your car is linked to the direction of your car. Certainly, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on Honda Fit, do not hesitate to consult this article to find the solution to your problem.
